Setting The S&Q Button For Raw; Zebra 1 / Zebra 2; Setting Zebra - Sony PXW-FS5 Firmware Update

Setting the S&Q button for
RAW
You can set the function to assign to the
S&Q button when recording in RAW mode.
(SYSTEM) t [
Select
BUTTON SET] in the menu and select a
function.
Settings (default setting in bold)
[ 4K/2K SUPER SLOW]*,
[ 4K SUPER SLOW],
[ 2K SUPER SLOW]
* When [ 4K/2K SUPER SLOW] is
selected, the function switches to [
SUPER SLOW]
t
OFF in sequence each time you press the
S&Q button.
z Tip
• Available only when full auto mode is off. Note
that exposure correction is set to manual.
GB
8
S&Q
t
[ 2K SUPER SLOW]

Zebra 1 / Zebra 2

The zebra function has been enhanced in
this version, allowing you to select the
following two types of setting. Also, the
level settings can now be adjusted in 1%
increments.
• Zebra 1: Set a reference level and range for
zebra display.
• Zebra 2: Display zebra above a set level.

Setting zebra

4K
Select
in the menu, and set the following items.
Item
[ZEBRA SELECT]
[ZEBRA1 LEVEL]
[ZEBRA1 APERTURE
LEVEL]
[ZEBRA2 LEVEL]
*1 Zebra 1 level (reference level)
*2 Zebra 1 range
*3 Zebra 2 level (minimum level)
When ZEBRA1 or ZEBRA2 is selected, the
icon or
b Notes
• Zebra 1 and zebra 2 cannot be displayed at the
same time.
• Zebra is not recorded onto the memory card.
• When [ZEBRA SELECT] is OFF, the zebra
point of the histogram is not displayed.
z Tip
• You can assign [ZEBRA] to an ASSIGN button.
The setting switches to OFF
ZEBRA2 each time you press the button.
(DISPLAY SET) t [ZEBRA]
Settings (default
setting in bold)
OFF, ZEBRA1,
ZEBRA2
*1 0% to 109% (1%
increments) (70%)
2% to 20% (2%
increments) (10%)
*2
0% to 109% (1%
*3
increments) (100%)
icon appears.
t t
ZEBRA1