Key Components - ChemInstruments PT-2000 Operating Instructions Manual

KEY COMPONENTS

 POWER SWITCH is located on the back panel of the control cabinet directly
beside the power cord connection.
 USB CONNECTION data output port for downloading test data.
 ANNULAR RING holds test material
 PROBE is used in measuring the force values of the test material
 LOAD CELL ASSEMBLY consists of the mounting bracket for the load cell with
grip.
 CALIBRATION HOOK is used to hang the weights during the calibration
procedure.
Probe Tack Tester Operating Instructions (PT-2000)
AC Power Input & Switch USB
Annular Ring
Probe
Load Cell Assembly
Calibration Hook
6 | P a g e