Product Description; Specifications - ChemInstruments PT-2000 Operating Instructions Manual

PRODUCT DESCRIPTION

Congratulations on the purchase of your new ChemInstruments Probe Tack Tester.
This versatile, user-friendly, carefully designed instrument allows you to determine
probe tack values of adhesive laminates.
WARNING: This equipment can cause injury if not used properly. It is
the operator's responsibility to observe all safety rules and warnings.
The unit has the following features:
 Automated test sequence.
 Collected test data can be exported via USB port.
 Selectable units of measure: Kilograms, Grams, Newtons, Pounds, and Ounces.
 Compatible with EZ Data System software. See
details.

SPECIFICATIONS

Electrical
Operating Temperature 32 – 122 degrees Fahrenheit (0 – 50 degrees Celsius)
Humidity
Speed
Dwell Time
Probe Diameter
Annular Ring
Physical Dimensions
Probe Tack Tester Operating Instructions (PT-2000)
120/240 VAC, 50/60 Hz, 2 amps
0 – 55% relative humidity
6 - 30 inches/minute, 1 IPM increments
2 - 12 millimeters/second, 1 mm/sec increments
1 – 30 seconds, 1 second increments
5 millimeter
19.6 grams
Width: 13 inches (33 centimeters)
Depth: 16 inches (41 centimeters)
Height: 18 inches (46 centimeters)
Weight: 25 pounds (12 kilograms)
www.cheminstruments.com for
3 | P a g e