ChemInstruments PT-2000 Operating Instructions Manual page 14

FORCE AND SPEED UNITS
Force and speed units can be changed with the following procedure.
1. Select SETUP from the main screen.
2. Select UNITS from the setup screen.
3. Select the desired units. Select OK to confirm the entered units.
SPEED
To perform a test correctly, it is necessary to set the test speed in accordance with the
selected test method. The following is a step-by-step procedure for setting the speed.
1. Select SETUP from the main screen.
2. Select SPEED from the setup screen.
3. Select CHANGE and enter the desired sled speed in the selected units and press
ENTER. Select OK to confirm the entered speed.
Probe Tack Tester Operating Instructions (PT-2000)
14 | P a g e