Product Description; Specifications - ChemInstruments AR-2000 Operating Instructions Manual

PRODUCT DESCRIPTION

Congratulations on the purchase of your new ChemInstruments AR-2000
Adhesion/Release Tester. This versatile, user-friendly, carefully designed instrument
allows you to determine adhesion and release values of adhesive laminates at various
speeds and at various angles of separation.
WARNING: This equipment can cause injury if not used properly. It is
the operator's responsibility to observe all safety rules and warnings.
The unit has the following features:
• 2 modes of operation: constant speed and ramped speed testing.
• Selectable testing speeds.
• Selectable separation angles from 90 degrees to 180 degrees.
• User-selectable data acquisition area on the test sample.
• Selectable units of measure: Kilograms, Grams, Newtons, Pounds, & Ounces.
• Compatible with EZ Data System software. See
details.

SPECIFICATIONS

Electrical
Operating
Temperature
Humidity
Speed
Physical
Dimensions
Adhesion/Release Tester Operating Instructions (AR-2000)
120 VAC, 50/60 Hz, 5 amps or 240 VAC, 50/60 Hz, 5 amps
32 – 150 degrees Fahrenheit (0 – 70 degrees Celsius)
0 – 55% relative humidity
1 – 1200 inches/minute (1 inch increments)
3 – 3048 centimeters/minute (1 centimeter increments)
Width: 36 inches (91 centimeters)
Depth: 13 inches (33 centimeters)
Height: 24 inches (61 centimeters)
Weight: 92 pounds (42 kilograms)
www.cheminstruments.com for
3 | P a g e