Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Guldmann 553000
Summary of Contents for Guldmann 553000
- Page 1 GB/US . . . . Free-standing rail system, adjustable Vers . 5 .00...
-
Page 2: Table Of Contents
8 .00 . . . . . . . . . Environmental policy statement - V . Guldmann A/S . . . . . . -
Page 3: Purpose And Use
1 .04 Hoists made by other manufacturers Guldmann is not liable for defects or accidents caused by the application of hoists/lifting modules made by other manufacturers. -
Page 4: Unpacking
If damage is suspected, the free-standing system should not be assembled or taken into use until the system has been approved by qualified service staff or the Guldmann Service Team. Unpacking Unpack the 3 boxes, consisting of: a. -
Page 5: Setting Up The System
1 .06 Setting up the system Fig . 1 Fig . 2 Raise one vertical pole module. Lift the top bracket and rail module and mount it on top of the vertical pole module. The top bracket must be flush with the mark on the vertical pole. - Page 6 Fig . 5 Fig . 6 Lift the top bracket and rail module Lock the rail to the top bracket and mount it on top of the vertical module with the 2 yellow thumb pole. Lock with the locking arm. screws.
- Page 7 Fig . 9 Fig . 10 Mount the end stop again and make Tighten the end stop. sure that the spring pin is positioned in the pre-drilled hole. Fig . 11 Fig . 12 In order to adjust the free-standing Tighten afterwards the 2 yellow rail system to the specific room size: thumb screws at each top bracket.
- Page 8 Adjust the height by inserting the Fix the recharging dock on the ver- accompanying 5 mm Allen key in the tical pole just below the Guldmann height adjustment socket at the side logo with the enclosed Velcro. of the vertical poles. Make sure that top bracket and rail module is level.
-
Page 9: Description Of Functions
2 .00 Description of functions 2 .01 Operation The free-standing rail system, adjustable, is a portable system that, once installed, does not require any further operation. 2 .02 Length and height adjustment Length adjustment (when the system is in the lowest position): •... -
Page 10: Transporting The System
As a minimum, the free-standing rail system should be taken apart so that the vertical pole modules are separated from the top brackets and rail (see 3.01). During transportation, Guldmann recommends that system, after it has been demounted, is always transported in the Guldmann Bag carrier portable, item No. 553225. 4 .00 Maintenance and storage 4 .01... -
Page 11: Safety/Service Inspections
Safety/service inspections of the products must be performed by a qualified service technician or the Guldmann Service Team. In connection with the purchase Guldmann may offer a service agreement for this inspection. -
Page 12: Technical Specifications
6.00 Technical specifications Free-standing rail system, 2,0 m Dimensions min. (HxW) ......2020 x 2220 mm Dimensions in extended pos. -
Page 13: Environmental Policy Statement - V . Guldmann A/S
8 .00 Environmental policy statement - V . Guldmann A/S Guldmann is continuously working towards ensuring that the company’s impact on the environment, locally and globally, is reduced to a minimum. It is Guldmann’s goal to: • Comply with the current environmental legislation (e.g. WEEE and REACH directives) •... -
Page 14: Usa And Countries Outside The Eu
(the “Warranty Period”). If a valid claim is made during the Warranty Period for malfunction or equipment defect, Guldmann will repair or replace the equipment at no additional cost to you. Guldmann retains sole discretion as to whether the equipment will be repaired or replaced. - Page 16 V . Guldmann A/S Corporate Office: Tlf. +45 8741 3100 +45 8741 3131 info@guldmann.com www.guldmann.dk Guldmann Inc . Tel. 800 664 8834 Tel. 813 880 0619 813 880 9558 info@guldmann.net www.guldmann.net...
Need help?
Do you have a question about the 553000 and is the answer not in the manual?
Questions and answers