Advertisement
CLEANING INSTRUCTIONS
CAUTION:
SHOCK HAZARD
Disconnect appliance from
electric power before cleaning.
CAUTION:
HOT SURFACE
Exposed surfaces can be hot
to the touch and may cause
burns. Allow appliance to cool
before cleaning.
PRECAUTIONS:
FREQUENCY:
TOOLS:
1.
Remove drawers from warmer:
a.
Pull warmer drawer out until fully extended.
b.
Slide finger along left and right slide rail until you reach the
latches (located at the front end of the cabinet-mounted rails)
Press down on both left and right latch.
c.
Pull drawer away from warmer.
2.
Clean drawers, drawer pans, Humitrol Racks and/or insets with warm
water and mild detergent.
Rinse all components thoroughly with clear water.
Dry all components prior to reinstalling them in warmer.
3.
Sweep crumbs and other debris from warmer cavity.
4.
Clean the outside of the unit by wiping with a clean cloth or sponge,
warm water and mild detergent. Dry with a clean cloth, then wipe with
a polish formulated for stainless steel.
5.
It is important to keep the slide rails clear and free from debris.
Periodic cleaning of the slide rails and other adjoining parts is
necessary to assure smooth drawer operation.
6.
Check drawer rollers. Be sure they roll freely and that the slide rails
are free from debris.
7.
Be sure cabinet-mounted drawer catch roller is "up", then re-install
drawers.
8
Turn control knob to OFF.
Allow drawers to cool before proceeding.
Remove drawer pans and Humitrol racks.
Minimum - Daily
Warm water and mild detergent
Clean cloth or sponge
IL2931
Advertisement
