Advertisement
Quick Links
011C
WELLS BLOOMFIELD, LLC
10 Sunnen Drive P.O.Box 430195
St. Louis, MO
63143 USA
telephone: 314-781-2777
fax: 314-781-2714
www.wellsbloomfield.com
OWNERS MANUAL
BUILT-IN
DOUBLE WELL
MODULAR
WARMERS
with
THERMOSTAT
CONTROL
MODELS
MOD-200T
MOD-200T, TD, TDM
MOD-200TN, TDN, TDMN
MOD-227TDM
Includes
INSTALLATION
USE & CARE
EXPLODED VIEW
PARTS LIST
MOD-200TDN
WIRING DIAGRAM
IMPORTANT: DO NOT DISCARD THIS MANUAL
This manual is considered to be part of the appliance and is to be given to the OWNER or
MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of
this appliance. Additional manuals are available from your WELLS DEALER.
THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR
INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any
questions concerning installation, operation or maintenance of this equipment.
PRINTED IN UNITED STATES OF AMERICA
2M-308018 Rev. (-)
09
p/n
M011C.02
0211 cps
Advertisement
Related Manuals for Wells MOD-200T
Summary of Contents for Wells MOD-200T
- Page 1 Additional manuals are available from your WELLS DEALER. THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any questions concerning installation, operation or maintenance of this equipment.
- Page 2 The for information and other details concerning warranty. prices charged by Wells Bloomfield for its products are SERVICE POLICY AND PROCEDURE GUIDE and ADDITIONAL WARRANTY EXCLUSIONS Resetting of safety thermostats, circuit breakers, over cleaning schedules, are customer responsibility.
- Page 3 PARTS & SERVICE CUSTOMER SERVICE DATA INTRODUCTION Thank You for purchasing this Wells Bloomfield appliance. Proper installation, professional operation and consistent maintenance of this appliance will ensure that it gives you the very best performance and a long, economical service life.
- Page 4 FEATURES & OPERATING CONTROLS A. THERMOSTAT 1. On THERMOSTATICALLY CONTROLLED warmers, power is applied to the heating element according to the control knob position and the actual temperature at the temperature sensing thermobulb. 2. The desired temperature is controlled by rotating the TEMPERATURE CONTROL KNOB.
- Page 5 Do not operate this appliance if the control panel is damaged. Call these instructions are not your Authorized Wells Service Agent for service. followed. The technical content of this manual, including any wiring diagrams, schematics, parts breakdown illustrations and/or adjustment procedures, is intended for use by qualified technical personnel.
- Page 6 INSTALLATION NOTE: DO NOT discard UNPACKING & INSPECTION the carton or other packing Carefully remove the appliance from the carton. Remove all materials until you have protective plastic film, packing materials and accessories from the inspected the appliance for Appliance before connecting electrical power or otherwise performing hidden damage and tested it any installation procedure.
- Page 7 INSTALLATION For “top-mounted” warmers (i.e. warmers mounted from above the counter top): a. Verify that provided sealants are applied to the underside of the warmer top flange prior to setting the unit into the cutout. b. After installation, verify that the tabs on the Wellsloks are turned out to lock the warmer into the counter c.
- Page 8 CAUTION: between the change in wet or dry operation. SHOCK HAZARD c. Wells Manufacturing recommends operating WET for consistent food heating. DO NOT splash or pour water d. If your wet-operation warmer is allowed to run dry, turn it onto control panel or wiring.
- Page 9 Never use metal implements, wire brushes, abrasive scratch pads or steel wool to clean stainless steel. Warmer pans, insets and other vessels are subject to a harsher environment. Wells Manufacturing uses an very high quality stainless steel (#304DDQ) for our food warmer pans.
- Page 10 Contact your Authorized Wells Service Agency to inspect warmer if water or grease contamination is suspected. Close drain valve. Add proper amount of warm water. Turn control...
- Page 11 CLEANING INSTRUCTIONS WEEKLY CLEANING INSTRUCTIONS CAUTION: CHEMICAL BURN PREPARATIONS: Remove any insets, pans and/or adapter tops. HAZARD Drain or remove water from well if used for wet operation. Deilimng chemicals may be caustic. Wear appropriate FREQUENCY: Weekly, or whenever lime or scale is seen personal protective equipment.
- Page 12 Drain-equipped unit will not hold water Drain valve damaged or pan(s) Contact your Authorized Wells leaking Service Agency for repairs There are no user-serviceable components in this appliance. In all instances of damage or malfunction, contact your Authorized Wells Service Agency for repairs.
- Page 13 Never use metal implements, wire brushes, abrasive scratch pads or steel wool to clean stainless steel. Warmer pans, insets and other vessels are subject to a harsher environment. Wells Manufacturing uses an very high quality stainless steel (#304DDQ) for our food warmer pans.
- Page 14 EXPLODED VIEW & PARTS LIST MOD-200T, MOD-200TD, MOD-200TDM MOD-200T ELEMENT ONLY 66681(120V) 503375 (208/240V) ELEMENT & PAN ASSEMBLY 503843 (208/240V) ELEMENT PAN KIT 503842 503352 THERMOBULB (ref.) 55741 55741 make from 56196 (150' roll) MOD-200TD 21709 make from 56050 (150' roll)
- Page 15 (208/240V) THERMOBULB (ref.) 55741 55741 bottom make from 56050 503352 503352 (150' roll) MOD-200TDN 21709 sides & ends 53201 make from 56196 (150' roll) 53201 MOD-200TDMN 21709 51040 53859 8706-109 55687 50177 54015 55609 58968 60843 50177 60498 8706-109 WELLS...
- Page 16 500706 21709 MOD-227TDM ELEMENT & PAN ASSY 503840 (incl. 50397 ELEMENT & 503352) PAN KIT 503841 THERMOBULB (ref.) 503352 make from 56196 (150' roll) 500700 500700 55609 500712 51040 53859 8706-109 55687 50177 54015 58968 60843 50177 60498 8706-109 WELLS...
- Page 17 WIRING DIAGRAM...
- Page 18 PARTS & SERVICE DESCRIPTION PART NO. Always use an inset. DO NOT place food directly ADAPTERS & INSETS into the warmer pan. ADAPTER TOP, convert 12” x 20” warmer to hold two 7 qt. insets 21502 ADAPTER TOP, convert 12” x 20” warmer to hold two 4 qt.
- Page 19 1¾” thick 22592* contact your Wells authorized service agency, or call: WELLSLOK EXTENSION KIT, for UL LISTED 12” x 20” warmers only, adapt to wood counter Wells Bloomfield, LLC up to 1¾”...
- Page 20 Commercial Food Equipment Service Association Wells Bloomfield proudly supports CFESA Commercial Food Equipment Service Association SERVICE TRAINING - QUALITY SERVICE SERVICE TRAINING - QUALITY SERVICE Genuine Parts Protect - YOU - All - Ways CUSTOMER SATISFACTION CUSTOMER SATISFACTION WELLS BLOOMFIELD, LLC 10 Sunnen Drive P.O.Box 430195...