Download
Share
Print this page
Xray T4F Instruction Manual
  1. Manuals
  2. Brands
  3. Xray Manuals
  4. Motorized Toy Car
  5. T4F
  6. Instruction manual

Xray T4F Instruction Manual

1/10 luxury electric touring car fwd
Hide thumbs

Advertisement

Quick Links

Download this manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the T4F and is the answer not in the manual?

Questions and answers

Related Manuals for Xray T4F

Summary of Contents for Xray T4F

  • Page 2: Safety Precautions

    Make sure you review this entire manual, download and use set-up book from the beginners, inexperienced customers, or by children without direct supervision web, and examine all details carefully. If for some reason you decide The T4F is of a responsible, knowledgeable adult. If you do not fulfill these requirements, not what you wanted or expected, do not continue any further.
  • Page 3 Therefore we ask you, if at all possible, to purchase • For the best performance, it is very important that great care is taken to ensure XRAY products at your hobby dealer and give them your support like we do. If the free movement of all parts.
  • Page 4 450cSt (HUDY #106345) 300.000cSt (HUDY #106630) of the XRAY Set-up Book, XRAY will now be offering only the digital online version on our website www.teamxray.com. By offering this online version instead of including a hardcopy printed version in kits, you will always be assured of having the most current updated version.
  • Page 5 COLOR INDICATIONS Style A - indicates parts that are included in the bag marked for the section. At the beginning of each section is an exploded view of the parts to be assembled. There is also a list of all the parts and part numbers that are related to the assembly of that section.
  • Page 6 941015 #309002 #304932 SET OF CERAMIC BALL-BEARINGS (14) GRAPHITE GEAR DIFF BEVEL & SATELLITE GEARS (2+4) 304900 XRAY GEAR DIFFERENTIAL - SET 903256 HEX SCREW SFH M2.5x6 (10) 304910 COMPOSITE GEAR DIFF. CASE & COVER 941015 BALL-BEARING 10x15x4 RUBBER SEALED - OIL (2) 304930 COMPOSITE GEAR DIFF BEVEL &...
  • Page 7 1. GEAR DIFFERENTIAL #304932 964031 S 3.5x10x0.2 GRAPHITE GEAR DIFF BEVEL & SATELLITE GEARS (2+4) INITIAL SETTING 300K cSt Fill differential up to the top of the diff pin. DO NOT fill the diff to the top of the housing. TO ENSURE YOU HAVE THE SAME AMOUNT OF OIL FROM REBUILD TO REBUILD, DO THE FOLLOWING: 8.30 #107865...
  • Page 8 1. GEAR DIFFERENTIAL 903256 SFH M2.5x6 DETAIL NOTE ORIENTATION ➊ ➌ ➍ ➋ Finish tightening in this order. Tighten the screws equally but do NOT tighten them completely. 941015 BB 10x15x4 BEARING OIL (HUDY #106230) BEARING OIL (HUDY #106230)
  • Page 9 T4 ALU LOWER ADJUSTMENT BULKHEAD - FRONT L / REAR R - ORANGE 940610 BALL-BEARING 6x10x3 RUBBER SEALED - OIL (2) 302764-O T4F ALU LOWER ADJUSTMENT BULKHEAD - FRONT RIGHT - ORANGE 962060 WASHER S 6x8x0.5 (10) 302765-O T4F ALU LOWER ADJUSTMENT BULKHEAD - FRONT LEFT - ORANGE...
  • Page 10 2. FRONT TRANSMISSION NOTE ORIENTATION DETAIL 903305 SFH M3x6 3x12mm 903306 NOTE ORIENTATION SFH M3x6 DETAIL 3x5mm 902312 SH M3x12 3x6mm 3x6mm #302063 ALU ADJUSTMENT BALL-BEARING HUB (2) BELT TENSION ADJUSTMENT Front diff UPPER position - tab in bottom Front diff LOWER position - tab in top notch notch - provides more steering, but less front - provides more front traction, but makes traction...
  • Page 11 2. FRONT TRANSMISSION DO NOT TIGHTEN FULLY AT THIS STEP 902306 SH M3x6 DO NOT TIGHTEN FULLY AT THIS STEP ➌ ➍ 940610 ➋ ➎ BB 6x10x3 ➊ 965050 980210 P 2x10 940610 BB 6x10x3 962060 SHIM 6x8x0.5 965050...
  • Page 12 2. FRONT TRANSMISSION 902304 SH M3x4 NOTE ORIENTATION DETAIL DO NOT TIGHTEN FULLY 902306 AT THIS STEP SH M3x6 DO NOT TIGHTEN FULLY AT THIS STEP FINISH TIGHTENING IN THIS ORDER. FINISH TIGHTENING IN THIS ORDER. Shock tower screws (4) FULLY TIGHTEN Shock tower screws (4) FULLY TIGHTEN...
  • Page 13 3. FRONT & REAR SUSPENSION #302101 ALU FRONT & REAR SUSPENSION ARM 1-HOLE - SWISS 7075 T6 (2+2) 362315 303720-O 307216 901408 303129 303129 362315 901310 303168 303710-O 903306 903306 362315 #303716-O ALU 2-PIECE SUSPENSION HOLDER - RIGHT – LOW 302720-O #303717-O ALU 2-PIECE SUSPENSION HOLDER - LEFT –...
  • Page 14 3. FRONT & REAR SUSPENSION REAR ARMS 901310 SB M3x10 REAR LEFT ARM REAR RIGHT ARM 2.3mm 901408 SB M4x8 4x8mm COMPLETED ASSEMBLY RIGHT REAR ARM LEFT REAR ARM 3x10mm REAR ARMS #303168 HARD INCLUDED #303169 GRAPHITE OPTION #303172 ALU OPTION REAR DOWNSTOP ADJUSTMENT...
  • Page 15 Outer position = 1mm or 1° from center TOE-IN TRACK-WIDTH The XRAY rear alu lower suspension holders provide even greater range of adjustment for the rear suspension. Using different combinations of eccentric bushings, fine adjustment of rear WHEELBASE ROLL CENTER squat, rear toe-in, rear roll center, and rear track-width can be obtained.
  • Page 16 (3.0mm) to slightly resize the holes in the arms. #107633 HUDY Arm Reamer 3.0mm The XRAY front alu lower suspension holders provide even greater range of adjustment for the front ECCENTRIC BUSHINGS HAVE TWO DIFFERENT OFFSETS FROM THE CENTER. TOE-IN suspension.
  • Page 17 ALU SHIM FOR RADIAL PLAY ADJUSTMENT ALU DUAL-SERVO SAVER ARM GRAPHITE STEERING OF STEERING ARM - ORANGE (2) PLATE SET 301162 T4F UPPER DECK 2.0MM GRAPHITE 372503 COMPOSITE SERVO SAVER - X-STIFF - SET - V2 302526 COMPOSITE DUAL SERVO SAVER ARM 302535...
  • Page 18 4. STEERING SERVO LINK STEERING LINKS Adjust servo link to fit your servo #302610 #302612-O ADJ. TURNBUCKLE L/R 40mm ALU ADJ. TURNBUCKLE M3 THREAD HUDY SPRING STEEL (2) L/R 39mm ORANGE - SWISS THREAD THREAD 7075 T6 (2) THREAD approximately 47mm 65.4mm BEARING OIL #302525...
  • Page 19 4. STEERING 3x5mm 902305 SH M3x5 903306 SFH M3x6 3x6mm 902306 SH M3x6 #302570 GRAPHITE STEERING PLATE SET Smart chassis flex adjustment via graphite steering plate which can be mounted with an additional aluminum stand. Using only the graphite steering plate, chassis flex is medium;...
  • Page 20 COMPOSITE C-HUB LEFT - 4° DEG. - MEDIUM - V2 307321 REAR ARM PIVOT PIN (2) 302463 T4F ANTI-ROLL BAR FOR BALL BEARINGS - FRONT 1.3 MM 362649 BALL END 4.9MM WITH THREAD 5MM (2) 302663 COMPOSITE BALL JOINT 4.9MM - OPEN - V2 (8) 362650 BALL END 4.9MM WITH THREAD 6MM (2)
  • Page 21 5. FRONT & REAR TRANSMISSION FRONT TRANSMISSION 901302 SB M3x2.5 THREAD LOCK 305394 GRAPHITE GREASE P 2x9 (HUDY #106210) 2x9mm Set-screw against GRAPHITE GREASE the flat spot THREAD LOCK (HUDY #106210) ECS drive shafts are available in 51mm length in kit, or optional 50mm & 52mm lengths. DRIVE SHAFTS Longer drive shafts (52mm) make the car easier to drive because they give more traction and #305332 52MM - ECS...
  • Page 22 5. FRONT & REAR TRANSMISSION FRONT TRANSMISSION T4 OPTIONAL PARTS 902205 SH M2x5 WHEEL HUBS #305350-K ALU - OFFSET 0 MM INCLUDED #305351 ALU - OFFSET -0.75 MM #305352 ALU - OFFSET +0.75 MM 940510 BB 5x10x4 #305353 ALU - OFFSET +1.5 MM 980210 STEERING BLOCKS P 2x10...
  • Page 23 5. FRONT & REAR TRANSMISSION REAR TRANSMISSION 303123-K SHIM 3x6x2 303127-K SHIM 3x6x4 INITIAL SETTING 901304 SB M3x4 LEFT UPRIGHT = RIGHT UPRIGHT 5mm THREAD ALU SHIM 3x6x2mm 8mm THREAD ALU SHIM 3x6x4mm INITIAL SETTING 25mm TIGHTEN GENTLY #307322 TITANIUM REAR ARM PIVOT PIN (2) 1-HOLE REAR UPRIGHTS (See page 21) Install the pivot balls with Professional Multi Tool (HUDY #183011)
  • Page 24 5. FRONT & REAR TRANSMISSION Install the pivot balls with Professional FRONT TRANSMISSION Multi Tool (HUDY #183011) 303122-K SHIM 3x6x1 303123-K SHIM 3x6x2 901304 SB M3x4 5mm THREAD ALU SHIM 3x6x1mm 10mm THREAD ALU SHIM 3x6x2mm 23mm #307222 TITANIUM FRONT ARM PIVOT PIN (2) TIGHTEN GENTLY ROLL-CENTER Install the pivot balls with Professional...
  • Page 25 5. FRONT & REAR TRANSMISSION INITIAL SETTING FRONT TRANSMISSION FREE MOVEMENT 303129 SHIM 3x6x1 FREE MOVEMENT BUMPSTEER SETTINGS COMPOSITE SHIM 3x6x1mm The number of shims changes the angles of the steering linkage. When no shims are used, the car is easy to drive into the corner. As the number of shims is increased, in-corner steering increases but the car becomes more difficult to drive.
  • Page 26 5. FRONT & REAR TRANSMISSION FRONT ANTI-ROLL BAR DETAIL ANTI-ROLL BARS FRONT ANTI-ROLL BAR 901303 SB M3x3 3x3mm 901304 3x4mm 3x3mm SB M3x4 3x4mm DETAIL CENTER Set the bar into the center, remove the play in the bushings, and tighten the set-screws fully. If both sides still do not When the bars are set, verify that move at the same time,...
  • Page 27 5. FRONT & REAR TRANSMISSION REAR ANTI-ROLL BAR REAR ANTI-ROLL BAR POSITION INITIAL POSITION INITIAL SETTING = MIDDLE BALL Use the INNER ball on low-traction Use the MIDDLE ball on low- to medium- Use the OUTER ball on high-traction tracks tracks (mainly low-traction carpet traction tracks (asphalt, carpet).
  • Page 28 SHOCK BALL JOINT - OPEN (4) 965023 E-CLIP 2.3 (10) 308324 ULP ALU SHOCK BODY (2) 970131 O-RING 13 x 1.0 (10) 308327-O ALU CAP FOR XRAY SHOCK BODY - ORANGE 972030 SILICONE O-RING 3 x 2 (10) 4 holes 1.1mm Ø 965023 INITIAL SETTING...
  • Page 29 6. SHOCK ABSORBERS SHOCK OIL 972030 NOTE O 3x2 ORIENTATION SHOCK OIL SHOCK OIL CUTAWAY VIEW SHOCK OIL DETAIL ➊ 970131 O 13x1.0 ➋ SHOCK OIL Be careful not to cross-thread the collar on the shock body. Install the ball joint with Professional Multi Tool (HUDY #183011) DETAIL 9.8mm...
  • Page 30 SHOCK LENGTH ADJUSTMENT: #308031-O ALU XRAY SHOCK SPRING RETAINING COLLAR - ORANGE (4) It is VERY IMPORTANT that all shocks are equal length. Fully extend the shock absorber and measure the end-to-end length; we recommend using digital calipers to give an accurate measurement. If a shock absorber is shorter or longer than others, adjust the shock length by tightening or loosening the ball joint on the shock rod.
  • Page 31 PIN 2x12 (10) 301332 REAR BODY MOUNT SET 6MM 301336 COMPOSITE REAR 6MM ADJUSTABLE BODY MOUNT SET 301232 T4F FOAM BUMER 333074-O ALU MOUNT 3x6x10.5MM - ORANGE (2) 308308-O ULP ALU SHOCK ABSORBER-SET - ORANGE (2) 902306 HEX SCREW SH M3x6 (10)
  • Page 32 7. FRONT & REAR ASSEMBLY 903308 SFH M3x8 903310 SFH M3x10 960030 N M3 3x10mm 3x10mm 3x8mm Cut the post here 981212 P 2x12 Cut the post here DETAIL...
  • Page 33 7. FRONT & REAR ASSEMBLY #301351-O ALU ADJUSTABLE BODY POST STOP (2) 902308 SH M3x8 981212 P 2x12 Very handy, easily externally adjustable body post from Swiss 7075 T6 aluminum. Allows for adjustment of body height by 3mm without needing to change the position on the body post. FRONT BODY MOUNT SET #301332 0mm INCLUDED...
  • Page 34 7. FRONT & REAR ASSEMBLY INITIAL SETTING DETAIL 902308 SH M3x8 981212 P 2x12 #301351-O ALU ADJUSTABLE BODY POST STOP (2) REAR BODY MOUNT SET Very handy, easily externally adjustable body #301336 INCLUDED post from Swiss 7075 T6 aluminum. Allows for #301337 +1mm OPTION adjustment of body height by 3mm without...

  • Page 35: Final Assembly

    7. FINAL ASSEMBLY Speed Controller (NOT INCLUDED) Receiver (NOT INCLUDED) LiPo Battery Pack 903306 (NOT INCLUDED) 306233 903306 306201 306219 309402 306310 (OPTION) Steering Servo (NOT INCLUDED) Servo Screw Motor (NOT INCLUDED) 306204-O (NOT INCLUDED) 306301 903306 902308 903308 376130 305912~306000 902308 (NOT INCLUDED)
  • Page 36 7. FINAL ASSEMBLY For improved weight balance and for more space for electronics, we recommend using a narrow, light servo. 903306 When adjusting steering on the radio, we recommend SFH M3x6 using full steering adjustment in order to get the best IMPORTANT! steering from the car.
  • Page 37 7. FINAL ASSEMBLY LIPO BATTERY CONFIGURATION There are 4 alternative battery positions, depending on the battery type used and weight balance preference. ALTERNATIVE 01 LiPo BATTERY SIDE ALIGNMENT 903306 Feed the receiver wire Double-sided Tape SFH M3x6 into the antenna tube HUDY #107875 (NOT INCLUDED) Servo...
  • Page 38 7. FINAL ASSEMBLY ALTERNATIVE 03 SHORTY LiPo BATTERY SIDE ALIGNMENT 903306 SFH M3x6 Double-sided Tape HUDY #107875 (NOT INCLUDED) Feed the receiver wire into the antenna tube Servo (NOT INCLUDED) Fibre-reinforced Tape #107870 HUDY Antena (NOT INCLUDED) Receiver (NOT INCLUDED) Shorty LiPo Speed Controller Battery Pack...
  • Page 39 7. FINAL ASSEMBLY 960140 N M4 We recommend using #107870 HUDY Fibre-reinforced Tape (NOT INCLUDED) Make sure the wheel nuts are very tight, so the wheels do not loosen during operation.
  • Page 40 RC AMERICA, 2030 Century Center Blvd #15, Irving, TX 75062, USA PHONE: 214-744-2400, FAX: 214-744-2401, xray@rcamerica.com /TeamXray /TeamXray /TeamXray /TeamXrayRC /XrayRacing /XrayRacing...