Advertisement
Available languages
Available languages
6.3. Safety advices
The housing may become hot during operation. Be cautious when touching it! For cleaning,
•
disconnect the light from the mains and let it cool down. Afterwards, take the light down.
When cleaning, take care that no humidity passes the ventilation slits and enters the interior of
•
the lighting system!
Pay attention to a sufficient thermal exchange. Keep ventilation slits always free! Do not mount
•
the system in enclosures or behind panels. Missing aeration may result in overheating and
damage electrical components.
Do not try to repair the lighting system. Please send it in for checking, preferably with a list of
•
defects and a copy of invoice, if applicable. Also, broken LEDs can be exchanged only by the
manufacturer.
When working on the light, always pull all power plugs.
•
6.4. Assembling/changing the lamp
Broken LEDs can be exchanged only by the manufacturer.
Electric connection:
The Ocean Light LED can be connected to any safety socket or a timer, if automatic operation is
required. In case of using a timer, all LEDs will be switched on and off at the same time.
A separate control of white and blue LEDs is possible by using the controller sunrise Control. It
can be connected to the connection socket of the Ocean Light LED by a control cable that
is available as an accessory (Art.-No. 86604).
When working on the light, always pull all power plugs!
6. 5. Maintenance and Care
Clean the glass regularly (caution: let it cool down) from residues of water splashes and
evaporation with a moistened cloth. Never use any additional cleaning agents!
7. Cover with fans
The fans are connected to the transformer provided via an Y-connecting cable. The fans are
adjustable and should remain constantly in operation at low power. Otherwise, water will
condense at the reflectors during the dark phase. If the outside temperatures are high, the fans
can be operated with higher speed.
8. Warranty
Should any defect in material or workmanship be found within twelve months of the date of
purchase AB Aqua Medic GmbH undertakes to repair or, at our option, replace the defective part
free of charge – always provided the product has been installed correctly, is used for the purpose
that was intended by us, is used in accordance with the operating instructions and is returned to us
carriage paid. The warranty term is not applicable on the all consumable products.
Proof of Purchase is required by presentation of an original invoice or receipt indicating the dealer's
name, the model number and date of purchase, or a Guarantee Card if appropriate. This warranty
may not apply if any model or production number has been altered, deleted or removed,
unauthorised persons or organisations have executed repairs, modifications or alterations, or
damage is caused by accident, misuse or neglect.
We regret we are unable to accept any liability for any consequential loss. These statements do not
affect your statutory rights as a customer. If your AB Aqua Medic GmbH product does not appear to
be working correctly or appears to be defective, please contact your dealer in the first instance. If
you have any questions your dealer cannot answer please contact us.
Our policy is one of continual technical improvement and we reserve the right to modify and adjust
the specification of our products without prior notification.
AB Aqua Medic GmbH - Gewerbepark 24 - 49143 Bissendorf/Germany
22
- Technical changes reserved – 01/2014
Advertisement
