Download Print this page

Aqua Medic Kauderni LED Operation Manual page 14

Salt-water aquarium system
Hide thumbs Also See for Kauderni LED:

Advertisement

Available languages

Available languages

3. Current pump NanoProp 5000
3.1. Delivery
● NanoProp adjustable current pump, 12 V DC, with computer-optimized propeller.
● Electronic safety transformer, 100 – 240 V, 1.5 A. Adjustable from 6 – 12 V.
3.2. Features
The NanoProp 5000 magnetically coupled current pump is very quiet in operation. It has a fully
encapsulated synchronous motor. An integrated thermal overheat protection device prevents
damage to the windings should the impeller rotation be impeded. The pumps can easily be taken
apart for cleaning. All materials are salt-water resistant.
The pump is operated with 12 V safety voltage, the transformer is included. The propeller of the
rotor is designed as a 3 blade model. This design runs more smooth than the 2 blade propellers.
The pump is adjustable. The transformer can be switched between 6 and 12 V to adjust the flow
rate. The pump is only designed for operation under water and pressure-free.
3.3. Technical data, table 1
Type:
Pump voltage:
Power uptake, watts:
Voltage transformer:
Max. l/h:
Min. l/h:
Cable length in m: Pump:
Protection:
Max depth:
Max. media temperature:
Adjustment at the transformer:
The flow rate can be adjusted at the transformer to level 6 / 9 / 12 V. When operating at 6 V, we
recommend firstly to select 9 or 12 V and then re-set to 6 V.
The pump is open at the front. Therefore, it should never be started uncontrolled, e. g.
via a time switch. Animals could be in the sucking in basket and they could be injured or killed by
the starting propeller.
In the back wall, there is an opening for mounting the current pump. At first, the necessary rubber
ring for a safe halt has to be inserted from the filter chamber (not from the aquarium's side). Now,
the pump has to be inserted in the retaining ring by holding the pump slightly slanting. It is also
possible to push the ring half on the pump and then insert it into the glass drilling. A further fixing
of the pump is not necessary. At the trafo, the lowest discharge is to be adjusted.
14
NanoProp 5000
6 – 12 V DC
4 – 7 watts
100 – 240 V, 50 – 60 Hz
5,000
2,000
2,8
Transformer:
1,50
IP 68
1 m
35° C
1m

Advertisement

loading