Warning Instructions For 800012 & 805037 Plastic Bags - Minuteman X829 Asbestos Series Parts And Instruction Manual

WARNING INSTRUCTIONS FOR
800012 & 805037 PLASTIC BAGS
TO PREVENT OVERHEATING AND DAMAGE TO THE MACHINE PLEASE FOLLOW THE
INSTRUCTIONS BELOW!
After placing the plastic recovery bag inside the tank, use a sharp knife to cut a 1" slit in the bag
at the top edge of the tank, on the side opposite the vacuum intake. This will allow the vacuum
pressure to equalize on both sides of the bag and prevent it from collapsing when the vacuum
motor is turned on. Failure to follow this instruction may cause overheating or more serious
damage and may void the warranty on this machine!
PLEASE DO NOT DISCARD THESE INSTRUCTIONS!
KEEP THIS SHEET WITH THE BAG PACKAGE!
Parts and Instruction Manual
Page 5