Minuteman X839 Asbestos Series Parts And Instruction Manual
Wet/dry vacuum
Hide thumbs
Also See for X839 Asbestos Series:
- Parts and instruction manual (11 pages) ,
- Parts and instruction manual (12 pages) ,
- Manual (16 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Minuteman X839 Asbestos Series
Summary of Contents for Minuteman X839 Asbestos Series
- Page 1 Parts and Instruction Manual X839 Asbestos Series Wet/Dry Vacuum...
- Page 2 This manual is furnished with each new MINUTEMAN X839 Asbestos Vacuum. This provides the necessary operating and preventive maintenance instructions. Operators must read and understand this manual before operating or servicing this machine. This machine was designed to give you excellent performance and efficiency. For best results and minimal cost, please follow the general guidelines below: ·...
-
Page 3: Table Of Contents
Lid Assembly BOM .......................... 9 Bag Assembly ..........................10 Adapter Assembly ......................... 11 Tank Assembly ..........................12 Optional Industrial Tools and Accessories ..................13 Hose Assemblies ........................... 14 Minuteman International Made Simple Commercial Limited Warranty ........15 Parts and Instruction Manual... -
Page 4: Important Safety Instructions
FOR COMMERCIAL USE ONLY IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING WARNING - To reduce the risk of fire, electric shock, or injury: • Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing. -
Page 5: Inspection
Inspection Carefully unpack and inspect your machine for shipping damage. Each unit is tested and thoroughly inspected before shipment, and any damage is the responsibility of the delivery carrier who should be notified immediately. Electrical - 115 Volt This machine is designed to operate on a standard 15 amp. 115 volt, 60 hz, AC circuit. Voltages below 105 volts AC or above 125 volts AC could cause serious damage to the motor. -
Page 6: User Maintenance Instructions
User Maintenance Instructions All service and repair should be performed by a qualified vacuum service representative or electrician. No user serviceable components are employed in the electrical vacuum lid head assembly. No lubrication of the motor is required. Cloth Bag & Hose Assembly Cloth bag and hose assy. -
Page 7: Tank/Filter Set-Up Procedure
Tank/Filter Set-Up Procedure Refer to “Poly Tank with 1:1 Adapter” 1. When using the poly adapter for dry pick-up follow the described procedures below for poly 6 mil. bag installation. A. Insert poly bag into tank assembly draping all excess bag height over the edge of tank. - Page 8 CHANGING THE PREFILTER SLEEVE The prefilter sleeve should be changed, using all of the precautions previously mentioned. The prefilter sleeve should be changed when any of the following takes place: 1. Anytime there is an indication of a filter tear during normal operation of the unit. This tear could be in any of the filters used.
-
Page 9: Poly Tank With 1:1 Adapter
Poly Tank with 1:1 Adapter 1. Motor Lid Assembly 2. Cloth Filter with Frame 3. Filter Protector 4. 1:1 Poly Adapter 5. Plastic Liner for Top Fill Dry Pickup 6. 15/20 Gallon Poly Tank Parts and Instruction Manual Page 6... -
Page 10: Warning Instructions For 800012 & 805037 Plastic Bags
WARNING INSTRUCTIONS FOR 800012 & 805037 PLASTIC BAGS TO PREVENT OVERHEATING AND DAMAGE TO THE MACHINE PLEASE FOLLOW THE INSTRUCTIONS BELOW! After placing the plastic recovery bag inside the tank, use a sharp knife to cut a 1” slit in the bag at the top edge of the tank, on the side opposite the vacuum intake. -
Page 11: Exploded Views
Exploded Views Lid Assembly Parts and Instruction Manual Page 8... -
Page 12: Lid Assembly Bom
Lid Assembly BOM ITEM PART NO. REQ’D DESCRIPTION 110003 MOUNTING PLATE (110038) 110012 MOUNTING PLATE (110039) 110028PKG PREFILTER SLEEVE, PKG OF 6 (110038) 110030PKG PREFILTER SLEEVE, PKG OF 6 (110039) 110038 FILTER-HEPA, 10" 110039 FILTER-ULPA, X839 SERIES 255008 BRUSH, CARBON - 105/130 255039 VACUUM MOTOR, BYPASS 115V-105 255040... -
Page 13: Bag Assembly
Bag Assembly ITEM PART NO. REQ’D DESCRIPTION 750097 BAG FRAME WELDMENT ASY 760131 MOLDED BAG RING- BLACK 805054 BAG, CLOTH BAG ONLY NEW STYLE 805057 BAG ASY COMP W/FRAME Parts and Instruction Manual Page 10... -
Page 14: Adapter Assembly
Adapter Assembly ITEM PART NO. REQ’D DESCRIPTION 380046 BALL, HOLLOW RUBBER 390001 MOLDED TRIGGER 390002 SPRING-RETURN 390035 LATCH 390 SERIES COATED 390037 ADAPTER POLY 1:1 BURGUNDY 390087 GASKET DIECUT VNN 390088 GASKET PS BACK 1:1 POLY 390101 INTAKE 390108 PIN-PIVOT 390110 INTAKE ASSEMBLY ALUMINUM 712530... -
Page 15: Tank Assembly
Tank Assembly ITEM PART NO. REQ’D DESCRIPTION 390031 HANDLE PLT 390 SERIES 390033 AXLE 390 SERIES PLATED 390035 LATCH-390 SERIES COATED 390041 TANK 15GRC NO HOLES 390051 TANK 20GRC W/ NO HOLES 710182 SCR-MC 1/4-20 X 1.00 ZINC 711352 NUT-ACORN 1/4-20 ST N1 711444PLT NUT-WELD 1/4-20 PLATED 711505... -
Page 16: Optional Industrial Tools And Accessories
Optional Industrial Tools and Accessories Parts and Instruction Manual Page 13... -
Page 17: Hose Assemblies
Hose Assemblies Parts and Instruction Manual Page 14... -
Page 18: Minuteman International Made Simple Commercial Limited Warranty
A potential health hazard exits without original equipment replacement. All warranted items become the sole property of Minuteman or its original manufacturer, whichever the case may be. Minuteman disclaims any implied warranty, including the warranty of merchantability and the warranty of fitness for a particular purpose.