Advertisement
Quick Links
INNOTECH
ENGLISH
ACHTUNG:
Die Montage und die Verwendung der Sicherungseinrichtung ist erst zulässig, nachdem der Monteur und der
Anwender die Original Aufbau– und Verwendungsanleitung in der jeweiligen Landessprache gelesen haben.
ATTENTION:
Assembling and using of the safety product is only allowed after the assembler and user read the original
installation and application instruction in his national language.
Attention!:
Le montage et l'utilisation du dispositif de sécurité ne sont autorisés qu'après lecture par le monteur et par
l'utilisateur de la notice d'origine de montage et d'utilisation dans la langue du pays concerné.
Attenzione:
Il montaggio e l'uso del dispositivo di sicurezza è ammesso soltanto dopo che il montatore e l'utente hanno
letto le istruzioni per l'installazione e l'uso nella rispettiva lingua nazionale.
ATENCIÓN:
No está permitido montar ni usar el dispositivo de protección antes de que el montador y el usuario hayan
leído las instrucciones de montaje y uso originales en la lengua del respectivo país.
Atenção:
A montagem e o emprego do mecanismo de proteção somente serão permitidos, após o montador e o
usuário terem lido as instruções de uso originais, no respectivo idioma do país, sobre a montagem e o
emprego do mesmo.
Attentie:
De montage en het gebruik van de veiligheidsinrichting is pas toegestaan, nadat de monteur en de
gebruiker de originele montage- en gebruikershandleiding in de desbetreffende taal gelezen hebben.
:
Figyelem
A biztonsági berendezés felszerelése és használata csak az után megengedett, miután a szerelést végző és a
használó személyek a nemzeti nyelvükre lefordított, eredeti használati utasítást elolvasták és megértették.
Pozor!
Montaža in uporaba varnostnih naprav je dovoljena šele takrat, ko sta monter in uporabnik prebrala
originalna navodila za montažo in uporabo v konkretnem jeziku.
POZOR:
Montáž a používání zabezpečovacího zařízení jsou povoleny až poté, co si pracovníci provádějící montáž a
uživatelé přečetli v příslušném jazyce originální návod k montáži a používání.
DİKKAT!
:
Güvenlik tertibatının montajına ve kullanımına, ancak montaj teknisyeni ve kullanıcı, orijinal kurulum ve
kullanma talimatını kendi ülke dilinde okuduktan sonra, izin verilir.
! :
Obs
Monteringen og anvendelsen av sikkerhetsinnretningene er gyldige først etter at montøren og brukeren har
lest den originale oppbygnings- og bruksanvisningen i det tilsvarende landets språk.
O B S :
Säkerhetsanordningen får inte monteras och användas förrän montören och användaren har läst igenom
konstruktionsbeskrivningen och bruksanvisningen i original på resp lands språk.
Huomio:
Turvalaitteiden asennus ja käyttö on sallittu vasta, kun asentaja ja käyttäjä ovat lukeneet alkuperäisen
asennus- ja käyttöohjeen omalla kielellään.
GIV AGT:
Montagen og brugen af sikkerhedsudstyret er først tilladt, efter at montøren og brugeren har læst den
originale vejledning i samling og brug på det pågældende lands sprog.
UWAGA:
Montaż i użytkowanie urządzenia zabezpieczającego dozwolone jest wtedy, gdy monter i użytkownik
przeczytają oryginalną instrukcję montażu i użytkowania w swoim języku.
Page 1 of 9
FAS 01-03
Edition 06/12/2014
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
ESPAÑOL
PORTUGUES
NEDERLANDS
MAGYAR
SLOVENSKY
ČESKY
TÜRKÇE
NORSK
SVENSKA
SUOMI
DANSK
POLSKI
INNOTECH FAS 01-03
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Innotech FAS 01
Summary of Contents for Innotech FAS 01
- Page 1 UWAGA: POLSKI Montaż i użytkowanie urządzenia zabezpieczającego dozwolone jest wtedy, gdy monter i użytkownik przeczytają oryginalną instrukcję montażu i użytkowania w swoim języku. Page 1 of 9 Edition 06/12/2014 INNOTECH FAS 01-03...
-
Page 2: Safety Instructions
• Especially certified guide bushes must be built into all anchor points in the window frame. FAS 01-03 fall prevention systems may only be inserted into original INNOTECH guide bushes of a depth of 27 mm. - Page 3 • Do not use the fall prevention system for windows for hoisting or letting down scaffolds, construction materials and cleaning materials, etc. • INNOTECH FAS 01-03 have been developed for personal safety and may not be used for other purposes.
- Page 4 BRIEF INSTRUCTIONS: (attention: for exact application, follow pages 5 - 6!) ADJUSTMENT LENGTHS AND WEIGHT (Fig.1) FAS 01 - 1.15 kg FAS 02 - 1.80 kg or 2.50 kg FAS 03 - 5.30 kg STANDARDS – TEST CRITERIA The fall prevention system for windows has been certified to provide collective side protection (guardrail) against falls to the outside as required by EN HD 1000/ÖNORM B 4007/ASchG /AAV.
-
Page 5: Installation
Proceed by pulling locking bolt A and carefully insert anchor peg 2 into the opposite bore Y that is marked on the window frame. Release locking bolt A to lock the fall prevention system for windows in place on the window frame (Fig. 5).Disassembly in reverse order. Fig. 4 Page 5 of 9 Edition 06/12/2014 INNOTECH FAS 01-03... -
Page 6: Maintenance
Always store the fall prevention system for windows in a dry location and with the spring slackened. ATTENTION The FAS 01-03 fall prevention system for windows should only be inserted into original and certified INNOTECH guide bushes. Since using third-party guide bushes poses a safety risk, no liability will be assumed in the event of damage caused by the use of such bushes. - Page 7 Should you have doubts about the stability of the anchor point, you can test the strength of the window frame and the anchor point. A suitable test device PG 01 has been developed by the manufacturer INNOTECH. WORK SITE (determining the elevation of the anchor point) Stand on window sill: If the window sill is the highest elevation of the work site, install at least 2 telescopic rods at the anchor points marked in red on the window frame (Fig.
- Page 8 • Select the most suitable and safest points on the window frame to act as anchor points in the frame seal of the window profile (Fig. 7). • Fit only certified INNOTECH guide bushes into all anchor points (Fig. 7). •...
- Page 9 Bore ∅ 12mm (Fig. 8) All anchor points on the window frame must be fitted with guide bushes that have been developed especially for the FAS 01-03 restraint system. The system should only be used in combination with INNOTECH guide bushes.
Need help?
Do you have a question about the FAS 01 and is the answer not in the manual?
Questions and answers