Disassembly Procedures - Panasonic Lumix DMC-FT10EB Service Manual

9.3.

Disassembly Procedures

No. Item
1 Rear Alumi Case,
Top Case Unit
2 Rear Case Unit
3 Camera Lens Unit
4 Main P.C.B.
5 Battery Frame Unit
6 Flash Top P.C.B.
7 Sub Ope P.C.B.
8 LCD Unit
Fig. Removal
Fig. D1 Card
Battery
4 Screws (A)
1 Screw (B)
Rear Alumi Case
Fig. D2 Top Case Unit
Fig. D3 Rear Ornament (R)
Rear Ornament (L)
Fig. D4 4 Screws (C)
(Tightening torque is regretted)
2 Screws (D)
(Tightening torque is regretted)
FP9004 (Flex)
FP9005 (Flex)
Rear Case Unit
Fig. D5 Note when attaching Rear
Case Unit
Fig. D6 3 Screws (E)
1 Screw (F)
FP9001 (Flex)
FP9002 (Flex)
Lens Plate
Camera Lens Unit
Fig. D7 Note before removal of Main
P.C.B.
Fig. D8 1 Screw (G)
2 Screws (H)
P9001 (Connector)
FP9003 (Flex)
PCB Earth Plate
Speaker
Main P.C.B.
Fig.D9 1 Screw (I)
1 Screw (J)
Batt Frame B
Fig.D10 Batt Frame A
Fig. D11 4 Screws (K)
Flash Top P.C.B.
Fig. D12 Caution of discharge
capacitor on Flash Top P.C.B.
Fig. D13 9 Screws (L)
Sub Ope P.C.B.
Fig. D14 4 Screws (M)
LCD Unit
9.3.1. Removal of Rear Alumi Case, Top
Case Unit
the
38
Fig. D1
Fig. D2