Panasonic Lumix DMC-FT10EB Service Manual page 25

3. Error Code List
The error code consists of 8 bits data and it shows the following information.
Attribute Main item Sub item
LENS Lens drive OIS
Zoom
Focus
Lens
Adj.History OIS
Error code
High 4bits Low 4 bits
18*0 1000 PSD (X) error. Hall element (X axis) position detect
error in OIS unit.
OIS Unit
2000 PSD (Y) error. Hall element (Y axis) position detect
error in OIS unit.
OIS Unit
3000 GYRO (X) error. Gyro (IC7101) detect error on SUB
OPE P.C.B.
IC7101 (Gyro element) or IC6001 (VENUS 4)
4000 GYRO (Y) error. Gyro (IC7101) detect error on Top
P.C.B.
IC7101 (Gyro element) or IC6001 (VENUS 4)
5000 MREF error (Reference voltage error).
IC9101 (LENS DRIVE) or IC6001 (VENUS 4)
6000 Drive voltage (X) error.
LENS Unit, LENS flex breaks, IC6001(VENUS 4) AD
value error, etc.
7000 Drive voltage (Y) error.
LENS Unit, LENS flex breaks, IC6001(VENUS 4) AD
value error, etc.
0?10 Collapsible barrel Low detect error
(Collapsible barrel encoder always detects Low.)
Mechanical lock, FP9002-(21) signal line or IC6001
(VENUS 4)
0?20 Collapsible barrel High detect error
(Collapsible barrel encoder always detects High.)
Mechanical lock, FP9002-(21) signal line or IC6001
(VENUS 4)
0?60 The zoom position jump is detected due to the impact
(i.e. drop.) to the camera occurs.
Lens unit
0?01 HP High detect error
(Focus encoder always detects High, and not
becomes Low)
Mechanical lock, FP9002-(21) signal line or IC6001
(VENUS 4)
0?02 HP Low detect error
(Focus encoder always detects Low, and not becomes
High)
Mechanical lock, FP9002-(21) signal line or IC6001
(VENUS 4)
18*1 0000 Power ON time out error.
Lens drive system
18*2 0000 Power OFF time out error.
Lens drive system
19*0 2000 OIS adj. Yaw direction amplitude error (small)
3000 OIS adj. Pitch direction amplitude error (small)
4000 OIS adj. Yaw direction amplitude error (large)
5000 OIS adj. Pitch direction amplitude error (large)
6000 OIS adj. MREF error
7000 OIS adj. time out error
8000 OIS adj. Yaw direction off set error
9000 OIS adj. Pitch direction off set error
A000 OIS adj. Yaw direction gain error
B000 OIS adj. Pitch direction gain error
C000 OIS adj. Yaw direction position sensor error
D000 OIS adj. Pitch direction position sensor error
E000 OIS adj. other error
Contents (Upper)
Check point (Lower)
25
Error Indication
Detecting Part/Circuit
device
OIS X LENSu NG
OIS Y
GYRO X GYRO NG
GYRO Y
OIS REF LENSSd/DSP
NG
OISX REF LENSu/LENS
FPC
OISY REF
ZOOM L ZOOMm/
LENSu
ZOOM H
(No indication) (No indication)
FOCUS L LENS FPC/
DSP
FOCUS H
LENS DRV LENSu
OIS ADJ OIS ADJ