Troubleshooting; Technical Specifications - Master HALL 3000I Operator's Manual

REGULAR CLEANING AND
INSPECTION
Before storing the heater for long periods of time,
clean it thoroughly. Always place it in a dry room and
protect it from dust. Before reusing the heater, check

TROUBLESHOOTING

WARNING: the heater has an internal overvoltage protection.
FAULT
One of the lamps doesn't turn on
The heater doesn't start
One of the lamps does not stay
on permanently

TECHNICAL SPECIFICATIONS

Power supply
Minimum heating power
Maximum heating power
Maximum absorption
CAUSE
Blown lamp
Blown fuse
Faulty connections (interrupted)
Faulty lamps
Faulty lamp
220/240V – 50Hz
1500W
3000W
13A
REGULAR CLEANING AND INSPECTION
TECHNICAL SPECIFICATIONS
the conditions of the power cable. When in doubt, call
the Technical Assistance.
The heater should always be inspected once a year.
The heater should
technicians authorized
CORRECTIVE ACTION
Replace
Replace
Disconnect the plug and inspect
the connections
Replace
Replace
110V – 50Hz
1500W
3000W
27A
TROUBLESHOOTING
be serviced by qualified
by the manufacturer.
2
GB