Montarbo LION Series Owner's Manual page 7

LION SERIES
Control Element
Mode 5: NC - Not used
Mode 6: 70V-Stereo
CHA and CHB are stereo 70V line output, the min load is 4Ω.
Mode 7: NC - Not used
Mode 8: NC - Not used
Mode 9: Auto-standby
If the switch is to on, and no signal input or signal input peak less than -20dB
after 20 minutes is detected, LION 2-1500 will go to standby (ERP Standards). If
a signal input peak greater than -20dB is detected, LION 2-1500 can restart.
1
OFF
ON
OFF
ON
OFF
ON
OFF
ON
7- CHA SPEAKON NL-4R
Connect the amplifier to you speaker with these speaker jacks.
8- CHB SPEAKON NL-4R
Connect the amplifier to you speaker with these speaker jacks.
9- AC Input
Use it to connect your Amplifier to the supplied AC cord.
Preset
2 3
OFF OFF
OFF OFF
ON OFF
ON OFF
OFF ON
OFF ON
ON ON
ON ON
Mode
4
OFF STEREO
OFF PARALLEL
OFF NC
OFF SUB-STEREO
OFF NC
OFF 70V-STEREO
OFF NC
OFF NC
ON Auto-Standby
- 7 -