Technical Specifications - Montarbo LION Series Owner's Manual

LION SERIES

Technical Specifications

Power Specifications (tolerance +/-5%)
Stereo Mode
(Both Channels Drive)
Electrical Specification
Input Sensitivity (Limit Off)
Input Impedance
Frequency Response
(at 10dB Rated Output Power 8 ohms)
Voltage Gain
THD+N
(Ref.1K 1/8 Rated Power,A-Weighted)
S/N rate
(Ref. Rated Power, A-Weighted)
Crosstalk (Below Rated Power)
Damping Factor (1K 8 ohms)
Power/Output Circuitry
General Specifications
Protections
Controls
Indicators
Connectors
Power Supply
Dimensions (mm)
Weight
2 ohms (EIAJ)
4 ohms (RMS)
8 ohms (RMS)
Full short circuit, open circuit, thermal, ultrasonic and RF protection stable
into reactive or mismatched loads, turn ON/OFF, muting, tried crowbar.
Front: AC switch, Input level control for each channel
Rear: Mode selector, Cut off frequency selectors
SIGNAL: 2 green LED
PROTECTION: red LED
INPUT: Neutrik combo XLR/TRS
OUTPUT: Speakon jacks
110V-120V or 220V-240V AC 50/60 Hz ±10%
483(W)*460(D)*44(H)
6.1 kg
- 12 -
2800W x 2
1500W x 2
900W x 2
0.9-1.1V (0+/-1dBv)
20k ohms balanced or
10k ohms unbalanced
20Hz ~ 20KHz (+0/-1dB)
40+/-0.5dB
<0.1%
>100dB
>70dB
>200
Switching Power
Class D
CLIP: 2 red LED POWER: 1 Green LED