Advertisement
Available languages
Available languages
1 . Characterization of the fall arrester
- Manufacturer's name and address:
Honeywell Fall Protection France SAS
35-37, rue de la Bidauderie
18100 VIERZON CEDEX - FRANCE
TéI: (33) 02 48 52 40 40
Fax : (33) 02 48 71 04 97
e-mail: techniserv .hsp@honeywell .com
Web: www .honeywellsafety .com
2 . General information
These operating instructions are only valid for Honeywell Fall Protection fall arresters for loads .
Only the manufacturer is allowed to modify the device .
The user has to take notice of the actual Regulations (laws, regulations, rules for accident prevention, technical
regulations) see attachment page 3 .
3 . Description of the fall arrester
The fall arrester for loads consists of a steel housing containing a rope drum pretensioned by a spring .
This spring tension guarantees that the lanyard is tensioned permanently and consequently that the
brake is activated immediately in case of a fall . The brake reacts to a rope extraction speed of approxima-
tely 0,35 m/s – 1,75 m/s and slows the falling load down so that the stopping distance is up to ca . 800mm
(depending on load and device type) . More exact values are added in the technical data .
It is no aloud to make a combination of the load arrester with other devices or other equipment for example
system parts of personal security equipment .
4 . Technical data
The Load arrester is build with proper special ropes depending on type of construction .
Device
Lasi 5 m / 6-2550L
Lasi 10 m / 6-2000L
Lasi 15 m / 6-2400L
Lasi 30 m / 6-2400L
Max . Load
- Maximum load without idler pulley
V1
- Max . rope pull velocity where the device does not arrest
V2
- Min . rope pull velocity where the device does sure arrest
Version T
- modified with TOPPAS-springs for higher arrest velocity
Version TB
- modified with TOPPAS-springs in Pos .B for higher arrest velocity
Version TA
- modified with TOPPAS-springs in Pos .A for higher arrest velocity
Ø drop height
- average fall distance of max . load without idler pulley
4
NT90024681 ver A.indd 4
Operating instructions
Fall arrester for loads
Type 6-2550 L / 6-2000L / 6-2400L
in according to EN 360
Devices are conform to EC machinery directive 2006/42/EG
minimum load: 30 kg
Version
SAP code
Max .Load (kg)
Standard
1006609
250
Standard
1006603
500
Standard
ME13732
500
Standard
ME21505
240
Serial-Number:
(watch mark on housing)
Next service:
(watch proof label)
!Control Card attachment page 2!
V1 [m/s]
V2 [m/s]
0,35
0,45
0,45
0,65
0,50
0,65
0,50
0,70
Ø drop height
[m]
0,75
0,65
1,20
0,60
16.02.16 10:41
Advertisement
