Clock/Timer
IMPORTANT!
– When in Eco Power standby mode, it is
not possible to operate the clock or timer
function.
Clock setting
The system only supports 24-hour time mode.
1
In standby or view clock mode, press CLOCK
once. In other source mode, press CLOCK
twice.
2
Press à or á repeatedly to set the hour.
3
Press í or ë repeatedly to set the minute.
4
Press CLOCK again to store the setting.
➜
The clock starts working.
To exit without storing the setting
●
Press STOP Çon the system.
Notes:
– The clock setting will be cancelled when the
power cord is disconnected or if a power failure
occurs.
– During clock setting, if no button is pressed
within 90 seconds, the system will exit clock setting
mode automatically.
22
Timer setting
The system can switch on to CD or TUNER
mode automatically at a preset time, serving as
an alarm to wake you up.
IMPORTANT!
– Before setting the timer, ensure that the
clock is set correctly.
1
In standby mode, press and hold on the remote
control for more than two seconds to select
timer mode.
➜
The last timer setting starts flashing.
➜
The selected source will be lighted.
2
Press CD 1/2/3 or TUNER to select the
desired source.
●
Before setting timer, make sure the music source
has been prepared.
CD – Load the disc(s).
TUNER – tune to the desired radio station.
3
Press à or á repeatedly to set the hour for
the timer to start.