Different Play Modes: Shuffle And Repeat; Programming The Disc Tracks; Erasing The Programme - Philips FWM375/05 User Manual

Different play modes: SHUFFLE
and REPEAT
You can select and change the various play
modes before or during playback. The play
modes can also be combined with
PROGRAMME.
SHUF ................ tracks of the entire disc are
played in random order
REP ALL ........... repeats the entire disc/
programme
REP ................... plays the current track
continuously
1
To select your play mode, press the SHUFFLE
or REPEAT button before or during playback
until the display shows the desired function.
2
Press PLAY/PAUSE 2; to start playback if in
the STOP position.
➜
If you have selected SHUFFLE, playback starts
automatically.
3
To return to normal playback, press the
respective SHUFFLE or REPEAT button until
the various SHUFFLE/ REPEAT modes are no
longer displayed.
● You can also press STOP 9 to cancel your play
mode.

Programming the disc tracks

Programming tracks is possible when playback is
stopped. Up to 40 tracks can be stored in the
memory in any order.
1
Load the desired discs on the disc tray (refer to
"Loading discs").
2
Press CD 1/2/3 to select a disc.
3
In stop mode, press PROGRAM on the
remote control to start programming.
➜
starts flashing.
PROG
4
Press í or ë repeatedly to select the desired
track.
●
For MP3 disc, press ALBUM -/+ and
TITLE -/+ to select the desired album and
title for programming.
5
Press PROGRAM to store the track.
6
To end programming, press STOP 9 once.
➜
stays and the programme mode
PROG
remains active.
CD/MP3-CD Operations
7
To start programme play, press PLAY/PAUSE
2;.
Notes:
– It is not possible to create a programme with
MP3 tracks from multiple CDs, or combined with
normal audio tracks.
– If you attempt to programme more than 40
tracks, "PrOGrAM FULL" is displayed.
– During programming, if no button is pressed
within 90 seconds, the system will exit the
programme mode automatically.
To review the programme
●
Stop playback and pressí or ë repeatedly.
● To exit review mode, press STOP 9.

Erasing the programme

You can erase the program by
● pressing STOP 9 once in the stop mode;
● pressing STOP 9 twice during playback;
●
selecting another source;
●
switching the set to standby mode,
●
opening the CD compartment.
➜
disappears and "CLEAr" is displayed.
PROG
For Recording, please refer to "Tape
Operation/Recording".
17