Preparations; Rear Connections; Power; Antenna Connection - Philips FWM375/05 User Manual

MW antenna
Speaker
(right)

Rear connections

The type plate is located at the rear of the
system.
A

Power

Before connecting the AC power cord to the
wall outlet, ensure that all other connections
have been made.
WARNING!
– For optimal performance, use only the
original power cable.
– Never make or change any connections
with the power switched on.
– High voltage! Do not open.You run the
risk of getting an electric shock.
– The machine does not contain any user-
serviceable parts.
– Modification of the product could result
in hazardous radiation of EMC or other
unsafe operation.
To avoid overheating of the system, a safety
circuit has been built in. Therefore, your
system may switch to Standby mode
automatically under extreme conditions. If
this happens, let the system cool down
before reusing it (not available for all versions).
AC power cord
FM antenna
B
Antennas Connection
Connect the supplied MW loop antenna to the
AM ANTENNA terminal. Adjust the position of
the antenna for optimal reception.
MW Antenna
1
3
MW ANTENNA
●
Position the antenna as far as possible from a TV,
VCR or other radiation source.

Preparations

Speaker
(left)
2
Fix the claw
to the slot
9