Timer Setting; Checking The Timer; Activate/Deactivate The Timer - Philips MC-I200/21M User Manual

Clock/Timer

Timer setting

The system can switch on to CD, TUNER,
CONNECT or PC-LINK mode automatically at
a preset time, serving as an alarm to wake you
up.
IMPORTANT!
– Before setting the timer, ensure that
the clock is set correctly.
– The timer will always be switched on
after it has been set.
– The volume of the timer will increase
gradually from the minimum level to the
last tuned volume level.
– The system will switch to standby
mode if no button is pressed within 30
minutes after timer wake up.
1
Press and hold CLK/TIMER for more than
two seconds to select timer mode.
"12:00 AM 12:00 AM 12:00 AM 12:00 AM" or "00:00 00:00 00:00" or the last timer 00:00
12:00 AM 00:00
setting starts flashing.
starts flashing.
The selected source will be lighted while
other available sources are flashing.
2
Press CD, TUNER, CONNECT or PC-LINK
to select the desired source.
For CD mode, the timer will wake up by
playing the first track of the disc or favourite list.
If the disc tray is empty, it will switch to Tuner
mode.
For Tuner mode, the timer will wake up by
playing the last tuned radio station.
For CONNECT or PC-LINK mode, the timer
will wake up by playing the last streamed music.
If the connection fails, it will switch to Tuner
mode.
Press S or T (or ¡ / ™ on the remote
3
control) to switch between hour or minutes
setting.
The hours or minutes digits flash.
Use the navigation jog (or press 3 / 4 on the
4
remote control) to set the hour and minutes.
30
5
Press CLK / TIMER to store the timer.
"TIMER TIMER", the set timer "XX:XX
TIMER TIMER TIMER
selected source will be displayed.
remains on the display.
At the preset time, the selected sound source
will play.
To exit without storing the setting
Press Ç.
Note:
– During timer setting, if no button is pressed
within 90 seconds, the system will exit timer setting
mode automatically.

Checking the timer

Press CLK / TIMER once on the remote
control.
If the timer has been activated, the set timer
information is displayed.

Activate/deactivate the timer

Press TIMER ON/OFF repeatedly on the
remote control.
If activated, the last set timer information is
displayed for a few seconds.
If deactivated, "TIMER OFF TIMER OFF" is displayed.
TIMER OFF TIMER OFF TIMER OFF
XX:XX" and the
XX:XX XX:XX XX:XX
3139 115 21561