EN
DELIVERY SET
Fan
Screws and dowels
Plastic screwdriver (for models with a timer)
User's manual
Packing box
BRIEF DESCRIPTION
The product described herein is a mixed-flow inline fan for supply or extract ventilation of premises.
The fan is designed for connection to ø 100, 125, 150, 160, 200, 250 and 315 mm air ducts.
The unit is equipped with a two speed motor.
FAN OPTIONS:
VENTS TT PRO XXX
VENTS TT PRO XXX V
VENTS TT PRO XXX RV
VENTS TT PRO XXX T
VENTS TT PRO XXX U (U1)
VENTS TT PRO XXX Un (U1 n)
VENTS TT PRO XXX P
– basic modification.
– modification with a built-in tree-position speed switch.
– modification with a built-in tree-position speed switch and power cord
with an IEC C14 connector (Fig. 31).
– modification with a turn-off delay timer regulated from 2 to
30 minutes (Fig. 30).
– modification with a speed controller with an electronic thermostat, a built-in
temperature sensor and a power cord with an IEC C14 connector (Fig. 32).
– modification with a speed controller with an electronic thermostat, external
temperature sensor (4 m long) and a power cord with
an IEC C14 connector (Fig. 33).
– modification with a smooth speed controller and a power cord with
an IEC C14 connector (Fig. 32).
— 1 pc.
— 4 pcs.
— 1 pc.
— 1 pc.
— 1 pc.
6