Central Control - Rain Bird ESP-LX Plus Series Installation, Connection And Settings

Maxicom Communications Status
When the "Central Control – Stand-Alone Switch" switch is
in the "Central Control" position, the LX PLUS Controller
display indicates the status of central control
communications:
Indication
NO COMM
LINKED

CENTRAL CONTROL

*blink*
CHAN XX
*blink*
STA XX
Note: "NO COMM" or "LINKED" indications are
only visible if the rotary switch is in the "Auto"
position.
16
Meaning
Ready, but not linked up with
the Central Control System
Linked to Maxicom 2® , but no
stations running
Linked to Maxicom 2® and under
central control. Channel XX,
Station XX running.
Status Light
The status light on the MISB is an indicator that the
ESP-LX PLUS SITE is functioning correctly. The status
light should always be blinking at one-second intervals.
Refer to the troubleshooting section (Page 3) if the status
light is not lit or is not blinking.
Reset Button
In addition to canceling active schedules at the ESP-LX
PLUS SITE, you can use the reset button to initialize the call
handle of an ESP-LX PLUS SITE when using a direct-con-
nect communication method. Refer to your MAXICOM
guide to operations for further information.
ESP-LX Plus Site Satellite Controller Addendum