Clock/Timer
Clock setting
The clock can be set in either 12-hour or
24-hour mode ("AM 12:00" or "00:00" for
example).
1
In standby mode, press and hold CLOCK SET.
➜
SET CLK is displayed briefly. Then, clock
digits for the hours flash.
2
Press Ç on the remote control to select clock
mode.
➜
Then, the clock digits for the hours continue
to flash.
3
Adjust VOLUME to set the hours.
4
Press CLOCK SET again.
➜
The clock digits for the minutes flash.
5
Adjust VOLUME to set the minutes.
6
Press CLOCK SET to confirm the time.
Timer setting
●
The system can be used as an alarm clock,
whereby the CD, TUNER or TAPE is switched on
at a set time (one time operation). The clock
time needs to be set first before the timer can
be used.
●
You can also use it to record a favourite tuner
programme at a set period (refer to "Recording
timer")
●
During setting, if no button is pressed within 15
seconds, the system will exit timer setting mode
automatically.
M C M 7 6 5
MP3 LINK
1
In standby mode, press TIMER on the remote
control for more than two seconds.
2
Press SOURCE repeatedly to select the sound
source.
➜
"SET TIME" and "SELECT SOURCE" are
displayed.
3
Press TIMER to confirm your desired mode.
➜
"SET ON TIME" is displayed and the clock
digits for the hours flash.
4
Adjust VOLUME to set the hours.
5
Press TIMER again.
➜
The clock digits for the minutes flash.
6
Adjust VOLUME to set the minutes.
7
Press TIMER to confirm the time.
➜
The timer is now set and activated.
Activating and deactivating timer
●
In standby or during playback, press TIMER on
the remote control once.
➜
Display shows
deactivated.
Sleep timer setting
The sleep timer enables the system to switch off
by itself after a set period of time.
1
Press SLEEP on the remote control repeatedly
to select a preset time.
➜
The selections are as follows (time in
minutes):
15 ™ 30 ™ 45 ™ 60 ™ 0 ™ 15 ...
➜
"SLEEP XX" is displayed. "XX" is the time in
minutes.
2
When you reach the desired length of time, stop
pressing SLEEP.
➜
"SLEEP" is displayed.
To deactivate the sleep timer
●
Press SLEEP repeatedly until "SLEEP 0" is
displayed, or press STANDBY-ON y.
if activated, and disappears if
19