Cd/Mp3-Cd Operations; Discs For Playback; Playing A Disc; Text Display - Philips MCM765/77 User Manual

CD/MP3-CD Operations

IMPORTANT!
The lens of the CD player should never be
touched.
X

Discs for playback

This system is able to play :
– All pre-recorded audio CDs
– All finalised audio CDR and audio
CDRW discs
– MP3-CDs (CD-ROMs with MP3 tracks)
●
CD-ROM, CD-I, CDV, VCD, DVD or computer
CDs, however, are not possible.

Playing a disc

1
Select CD source.
2
Press OPEN/CLOSEç to open the CD
compartment.
➜ "CD OPEN" is displayed.
3
Insert a disc with the printed side facing up and
press OPEN/CLOSEç to close the CD door.
➜
"READING" is displayed as the CD player
scans the contents of a disc, and then the total
number of tracks and playing time (or the total
number of albums and tracks for MP3 disk) are
shown.
4
Press É Å to start playback.
12
M C M 7 6 5
MP3 LINK
To interrupt playback
●
Press É Å .
●
To resume playback, press É Å again.
To stop playback
●
Press Ç.
Notes:
– Disc play will also stop when you select another
source or the disc has reached the end.
– For MP3 disc, the disc reading time may exceed
10 seconds due to the large number of songs
compiled into one disc.

Text display

In CD mode
●
Press DISPLAY (or DISPLAYon the remote
control) repeatedly to see the following
information.
➜
Track number and elapsed play time of
current track.
➜
Remaining play time of current track.
➜
Track number and total elapsed time.
➜
Track number and total remaining play time.
In MP3-CD mode
●
Press DISPLAY (or DISPLAYon the remote
control) repeatedly to select four display modes :
Number, Track, Album and ID3.
Number ➜ The current album and track
numbers are displyed briefly.
Track ➜ The current track name scrolls twice.
Album ➜ The current album name scrolls twice.
ID-3 ➜ The ID-3 tag scrolls twice.

Selecting a different track

● Press TUNING S/T (
remote control) repeatedly until the desired
track number appears in the display.
●
If playback is stopped, pressÉ Å to start
playback.
on the
S/T