Preparations; Rear Connections; Power; Antennas Connection - Philips MCM765/77 User Manual

Preparations

Speaker
(right)

Rear connections

The type plate is located at the rear of the
system.
A

Power

Before connecting the AC power cord to the
wall outlet, ensure that all other connections
have been made.
WARNING!
– If your system is equipped with a voltage
selector, set the VOLTAGE SELECTOR to
the local power voltage.
– For optimal performance, use only the
original power cable.
– Never make or change connections with
the power switched on.
To avoid overheating of the system, a safety
circuit has been built in. Therefore, your
system may switch to Standby mode
automatically under extreme conditions. If
this happens, let the system cool down
before reusing it (not available for all versions).
6
FM wire antenna
B
HR
HL
LR
C
LL
B

Antennas Connection

Connect the supplied FM antenna to the
respective terminals. Adjust the position of the
antenna for optimal reception.
FM Antenna
●
For better FM stereo reception, connect an
outdoor FM antenna to the FM AERIAL (FM
ANTENNA) terminal.
AC power cord
A
Speaker
(left)