IMPORTANT!
Before you operate the system, complete
the preparation procedures.
Switching the system on
●
Press STANDBY ON 2 or SOURCE.
➜
The system will switch to the last selected
source.
●
Press CD, USB, TUNER, TAPE or MP3
LINK on the remote control.
➜
The system will switch to the selected source.
Switching the system to Standby
mode
●
Press STANDBY ON 2 in the active mode.
➜
The system enters the normal standby mode
with clock display.
➜
If the clock has not been set, "--:--" is
displayed.
●
The interactive sound settings, last selected
mode, source and tuner presets will be retained
in the player's memory.
Power-saving automatic standby
As a power-saving feature, the system will
automatically switch to Standby mode if you do
not press any buttons within 15 minutes after a
disc, USB, or tape has stopped playing.
M C M 7 6 5
MP3 LINK
Basic Functions
Volume control
Adjust VOLUME (VOL + / - on the remote
control) to increase or decrease the volume
level.
➜
Display shows the volume level "VOL" and a
number from 1-31. "MIN" denotes the minimum
volume level and "MAX" denotes the maximum
volume level.
To switch off the volume temporarily
●
Press MUTE on the remote control.
➜
Playback will continue without sound and
"MUTE" is displayed.
●
To restore the volume, press MUTE again or
increase/decrease the volume level.
Sound control
●
Press DSC repeatedly to select the desired
sound effect : OPTIMAL, ROCK, JAZZ or POP.
●
Press DBB/IS to switch on or off the surround
sound effect or bass enhancement.
➜
The sequences are as follows :
DBB ON ™ INCREDIBLE
SURROUND ™ DBB
INCREDIBLE SURROUND™
DBB OFF
➜
If the DBB is activated,
shown briefly.
➜
If the IS is activated,
INCREDIBLE SURROUND
➜
If both the DBB and IS are activated,
INCREDIBLE SURROUND
Note:
– The effect of INCREDIBLE SURROUND may
vary with different types of music.
is
DBB
scrolls.
DBB
scrolls.
11