Timer; Setting The Timer; Activating And Deactivating Timer; Sleep - Philips MCM279/12 User Manual

Timer

Setting the timer

The set can be used as an alarm clock, whereby
the selected source (CD, TUNER or USB) star ts
playback at a preset time. Make sure the
clock is set before using the timer.
1
In standby mode, press and hold TIMER on the
remote control until
➜ flashes. SELECT SOURCE displays.
2
Press SOURCE on the set repeatedly to select
the source (or press CD, TUNER or USB on
the remote control).
3
Press TIMER to confirm.
➜
The hours digits start flashing.
4
Hold down or press VOLUME +/- repeatedly
to set the hours.
5
Press TIMER to confirm.
➜
The minutes digits start flashing.
6
Hold down or press VOLUME +/- repeatedly
to set the minutes.
7
Press TIMER to confirm.
➜
The timer is now set and activated.
➜
At the set alarm time, the CD, TUNER or
USB will switch on (volume level: max. 13).
Note:
– The set will exit from the timer setting mode if
no button is pressed within 90 seconds.
Activating and deactivating
TIMER
●
In standby mode, press and hold TIMER ON/
OFF on the remote once or more to activate
or deactivate the timer.
➜
Display shows
disappears if deactivated.
appears.
if activated, and
Helpful hints:
The timer will not work at the set time if
- the set is switched on
- the timer is deactivated
The set will switch to Tuner source
automatically if :
- no CD is inserted when the selected source is CD;
- no USB device is connected when the selected
source is USB.

SLEEP

You can set a certain period of time after which
the set will switch off.
●
During playback, on the remote control, press
SLEEP repeatedly to select the desired time
period options (in minutes):
➜
Display shows in sequence: Sleep 90, 75,
60, 45, 30, 15
➜
Display shows the selected option briefly and
returns to its previous status. The icon
appears.
To deactivate the sleep timer, press
SLEEP again.
➜
The icon disappears.
or
Press STANDBY-ON/ ECO POWER to
switch off the set (or y on the remote control).
Helpful hints:
– The SLEEP function does not affect your alarm
time setting.
SLEEP
25