Troubleshooting - Philips MCM279/12 User Manual

Troubleshooting

The remote control does not function
properly.
The timer is not working.
The Clock/Timer setting is erased.
The USB device doesn't play on my
MCM279.
The disc file cannot be recorded to the
USB device
28
✔
Select the source (CD or TUNER, for example)
before pressing the function button (É Å,í,
ë).
✔
Reduce the distance between the remote
control and the system.
✔
Insert the battery with its polarities
(+/– signs) aligned as indicated.
✔
Replace the battery.
✔
Point the remote control directly toward
IR sensor on the front of the system.
✔
Check the set is switched off
✔
Set the clock correctly.
✔
Press TIMER to switch on the timer.
✔
Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
✔
It is not set in the USB mode. Select USB mode.
✔
The device is not securely connected to
MCM279's USB por t. Re-connect the device.
✔
The device is not supported by MCM279, or the
audio file format stored on the device is not
supported by MCM279. Use a compatible
device/ playable audio file format.
✔
You stop recording when the MP3 or WMA file
you want to record is still playing. Select record-
one mode to record, or stop recording only
when the playback of MP3 or WMA file is wholly
completed.
✔
The memory of the USB device runs out. Delete
some unwanted files on the USB device to free
some memory, or use another USB device of
sufficient free memory to record.
✔
The name of a MP3 or WMA file on the disc is
identical to the one of a file on the USB device.
Change to a different name for the file on the
USB device.