Selecting And Searching; Selecting A Different Track; Finding A Passage Within A Track During Playback; Programming Tracks - Philips MCM279/12 User Manual

CD

Selecting and searching

Selecting a different track

● Press 4 / ¢ on the set (or í/ ë on the
remote control ) once or repeatedly until the
desired track number appears in the display.
➜
MP3/WMA: Track information scrolls briefly.
MP3/WMA:
●
Press ALBUM/ PRESET +/- on the set (or 3
/ 4 on the remote control ) once or more to
select the next or previous album.
➜
Album information scrolls briefly.
or
●
In the stop position, press ALBUM/ PRESET
+/- on the set (or 3 / 4 on the remote
control ) and then 4 / ¢ ( or í/ ë on
the remote control ) to select the desired album
and track.
➜
MP3/WMA: Display shows current album/
track number.
Finding a passage within a track
during playback
1
During playback, press and hold 4 / ¢ on
the set (or à / á on the remote control ).
➜
The CD plays at a high speed.
2
When you recognize the passage you want,
release 4 or ¢ or à / á.
➜
Normal playback resumes.
18

Programming tracks

You may store up to 40 tracks in the desired
sequence. If you like, store any track more than
once.
1
In the stop position, press PROGRAM to start
programming.
➜ PROG flashes.
2
Press 4 / ¢ on the set (or í/ ë on the
remote control ) once or repeatedly until the
desired track number appears in the display.
●
MP3/WMA: press ALBUM/ PRESET +/- on
the set (or 3 / 4 on the remote control ) and
4 / ¢ on the set (or í/ ë on the
remote control ) to select the desired album and
track.
3
Press PROGRAM to confirm.
➜
Display shows briefly the number of tracks
programmed.
➜
Then, the display shows the track number
you just stored.
4
Repeat steps 2-3 to select and store all desired
tracks.
➜ FULL is displayed if you attempt to program
more than 40 tracks.
5
Press ÉÅ play the program.
Helpful hints:
– The set will return to the stop position if no
button is pressed within 90 seconds. To resume
programming, press PROGRAM.
– MP3/WMA: When playing a program, use of
ALBUM/ PRESET are void.

Erasing the program

You can erase the contents of the memory by:
● Press STOP 9
– once if in the stop position;
– twice during playback;
●
Press STANDBY-ON/ ECO POWER.
●
Select another sound source.
●
Open the CD door.
➜ PROG disappears.