Connecting An Additional Appliance; Connecting A Usb Device; Connecting A Non-Usb Device - Philips MCM279/12 User Manual

Micro hi-fi system with mp3/wma-cd playback usb direct
Hide thumbs Also See for MCM279/12:
Table of Contents

Advertisement

Position the antenna as far as possible from a TV,
VCR or other radiation source.
FM antenna
The wire antenna supplied can only be used to
receive nearby stations. For better reception we
recommend using a cable antenna system or an
outdoor antenna.
1
Extend the wire antenna and fit it to FM
ANTENNA as shown below
Note: If you are using a cable antenna system or
an outdoor antenna, fit the antenna plug, instead of
the wire antenna, to FM ANTENNA .
2
Move the antenna in different positions for
optimal reception (as far away as possible from
the TV, VCR or other radiation sources)
3
Fix the antenna's end to the wall.
Helpful hints:
– To receive optimal radio reception, put the main
unit and the antennas as far away as possible from
the power adaptor.
Connecting an additional
appliance
Connecting a USB device or memory
card
By connecting a USB mass storage device
(including USB flash memory, USB flash players
or memory cards) to the Hi-Fi system, you can
enjoy the music stored on the external device
through the powerful speakers of Hi-Fi system.
Insert the USB device's USB plug into the socket
on the front panel of the main set.
Or,
for the devices with USB cable:
a. Insert one plug of the USB cable (not
supplied) to the socket
panel of the main set.
b. Insert the other plug of the USB cable to the
USB output terminal of the USB device.
Or,
for the memory card:
a. Insert the memory card into a card reader
(not supplied).
b. Use a USB cable (not supplied) to connect
the card reader to the socket
front panel of the main set.

Connecting a non-USB device

It is possible to use an additional appliance, e.g.
TV, VCR or CD recorder with the set. On
MCM279, you can playback music from an
external source.
1
Insert one plug of the audio cable (not supplied)
to the socket AUX IN at the rear panel of the
main set.
2
Connect the other end of the audio cable to the
AUDIO OUT terminal of the additional
appliance.
3
Select AUX mode on the set.
Helpful hints:
– Always refer to the owner's manual of other
equipment for complete connection.
Installation
on the front
on the
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mcm279

Table of Contents