Basic Functions; Adjusting Volume And Sound; Switching The System On - Philips MCM108D/98 User Manual

Basic Functions

SOURCE BAND
STANDBY-ON
IMPORTANT:
Before you operate the system, complete
the preparation procedures.

Switching the system on

●
Press STANDBY-ON (y on the remote
control).
➜
The system will switch to the last selected
source.
●
Press SOURCE (CD, TUNER or DOCK on
the remote control).
➜
The system will switch to the selected source.
To switch the system to standby mode
●
Press STANDBY-ON (y on the remote
control).
➜
The clock is displayed.
Note:
– If the clock has not been set, -- --:-- -- will be
displayed.
Power-saving automatic standby
The power-saving feature automatically switches
to standby 15 minutes after a CD playback has
ended and no control is operated.
-
PROG/CLOCK VOLUME + TUNING

Adjusting volume and sound

1
Press VOLUME – /
volume.
➜
Display shows the volume level
number from 0-32.
2
Press DSC repeatedly to
select the desired sound effect:
JAZZ / POP / CLASSIC /
ROCK.
3
Press DBB (on the remote control) to switch
bass enhancement on or off.
➜
Display shows:
4
Press MUTE on the remote control to stop
sound play-back instantly.
➜
Playback will continue without sound and the
display shows MUTE .
●
To start sound playback you can:
– press MUTE again;
– adjust the volume controls;
– change source.
+
to increase or decrease
and a
VOLUME
DBB
if the DBB is activated.
DBB
DSC
6