Above 4G Decoding - ASROCK EPYCD8-2T User Manual

EPYCD8-2T / EPYCD8
PCIE Slot 5 Link Width
This allows you to select PCIE5 Link Width. The default value is [x16].
PCIE Slot 7 Link Width
This allows you to select PCIE7 Link Width. The default value is [x16].
PCIE1 Link Speed
This allows you to select PCIE1 Link Speed. The default value is [Auto].
PCIE2 Link Speed
This allows you to select PCIE2 Link Speed. The default value is [Auto].
PCIE3 Link Speed
This allows you to select PCIE3 Link Speed. The default value is [Auto].
PCIE4 Link Speed
This allows you to select PCIE4 Link Speed. The default value is [Auto].
PCIE5 Link Speed
This allows you to select PCIE5 Link Speed. The default value is [Auto].
PCIE6 Link Speed
This allows you to select PCIE6 Link Speed. The default value is [Auto].
PCIE7 Link Speed
This allows you to select PCIE7 Link Speed. The default value is [Auto].

Above 4G Decoding

Enable or disable 64bit capable Devices to be decoded in Above 4G Address Space (only if
the system supports 64 bit PCI decoding)
SR-IOV Support
If system has SR-IOV capable PCIe Devices, this option Enables or Disables Single Root IO
Virtualization Support.
Restore AC Power Loss
This allows you to set the power state after a power failure. If [Power Off] is selected, the
power will remain off when the power recovers. If [Power On] is selected, the system will
start to boot up when the power recovers.
43