Lega 6962 Instruction Manual page 21

Rotating loader

Table of Contents

Available languages

If you expect not to use the machine for a prolonged period of time, check the state of repair of its mechanical

parts and carry out any required checking, replacement or maintenance to ensure that the machine is ready for

use upon the next power-on.

Before periods of prolonged inactivity, coat the chromium plated parts of the machine with a thin film of paraffin

oil and then cover the machine with a tarpaulin.

4.1 LOGO PROGRAMMING INSTRUCTIONS

Plug the rotating loader into line power and switch on the main switch (25) located in the control panel

(ref. fig. 3).

After restoring the emergency control, parameter setting-up can be carried out.

To select the correct (SET PARAM) field, press the key F4 and then ESC to access the list shown in the

screen display picture here below.

8) Highlight Set Param with the arrow UP (1) or arrow DOWN (4) key then press OK (5).

Once on the program to modify, press OK (5).

The LOGO! pre-set data are:

LEGA

srl srl srl srl

www.legaitaly.com - - - - Tel 054626834

www.legaitaly.com

- T refers to the time setting, while Ta is the operation timer.

Only the T value can be modified as is clearly visible -

T = 04,00 Tempo dosata

T = 01,00 Tempo sosta dopo dosata

C C C C ostruzioni

ostruzioni A A A A pistiche

pistiche – – – – via Maestri del Lavoro 23

ostruzioni

pistiche

Tel 054626834 – – – – Fa

Tel 054626834

via Maestri del Lavoro 23 – – – – 48018 Faenza

via Maestri del Lavoro 23

Fax 054628279

x 054628279 – – – – P.iva 00043230390

x 054628279

48018 Faenza

P.iva 00043230390

21 / 68

Table of Contents