Other Features; Set The Alarm Timer; Set The Sleep Timer; Play From An External Device - Philips DCM278/93 User Manual

7 Other features

Set the alarm timer

This unit can be used as an alarm clock. The
disc/radio/USB/iPod is activated to play at a
preset time.
Note
•
Ensure that you have set the clock correctly.
1
Press to switch to standby mode.
2
Press and hold SLEEP/TIMER for more
than two seconds.
»
A prompt to select the source is
displayed.
3
Press CD, TUNER, USB or iPod to select
a source.
4
Press SLEEP/TIMER to confirm.
»
The clock digits are displayed.
»
The hour digits begin to blink.
5
Press / to set the hour.
6
Press SLEEP/TIMER to confirm.
»
The minute digits begin to blink.
7
Press / to set the minute.
»
The timer is set and activated.
»
is displayed.

Set the sleep timer

This unit can switch to standby automatically
after a set period of time.
1
When the unit is turned on, press
SLEEP/TIMER repeatedly to select a set
period of time (in minutes).
»
When sleep timer is activated,
displayed.
2
Press SLEEP/TIMER repeatedly until
[OFF] (off) is displayed.
»
When sleep timer is deactivated,
disappears on the display.

Play from an external device

You can also listen to an external audio device
through this unit.
1
Press USB/MP3 LINK to select the MP3
link source.
2
Connect the supplied MP3 link cable to:
• the MP3 LINK jack (3.5mm) on the
unit.
• the headphone jack on an external
device.
3
Start to play the device (see the device
user manual).
is
EN 15