Philips DCM-278 Mounting Instructions

155 mm (6.10")

Wall mounting instructions

Drill holes on wall at hole positions marked.*

Note for mounting

• To secure the mounting on wall, concrete wall is required.
Use screws to mount the main unit on the wall
1. Use this sheet as a template. Mark the position where you want to
hang the unit on the wall (as shown above) and then drill two 6mm
diameter holes.
2. Secure the 2 dowels and 2 screws (both supplied) in the holes
respectively. Leave the screws 5mm proud of the wall.
3. Hang the unit on the fastening screws.
ENGLISH
DCM278_05_Wall mounting instructions_V1.0