Other Features; Set The Alarm Timer; Set The Sleep Timer; Listen To An Audio Player - Philips DCM109/93 User Manual

10 Other features

Set the alarm timer

This unit can be used as an alarm clock. The
DISC, TUNER, USB or iPod/iPhone source can
be activated to play at a preset time.
1
Ensure that you have set the clock
correctly.
2
Press and hold SLEEP/TIMER.
3
Press DISC , TUN, USB or iPod/iPhone
to select a source.
4
Press SLEEP/TIMER
»
The hour digits are displayed and begin
to blink.
5
Press / to set the hour.
6
Press SLEEP/TIMER
»
The minute digits are displayed and
begin to blink.
7
Press / to set the minute.
8
Press SLEEP/TIMER
»
The timer is set and activated.
Note
If the DISC/USB/iPod/iPhone source is
selected but no disc inserted or no USB/ iPod/
iPhone is connected, the system will switch to
the tuner source automatically.
Activate and deactivate alarm timer
1
In the standby mode, press SLEEP/TIMER
repeatedly to activate or deactivate timer.
»
If timer is activated, the display shows
.
»
If timer is deactivated,
the display.

Set the sleep timer

This unit can switch to standby automatically
after a set period of time.
1
2

Listen to an audio player

You can listen to an MP3 player through this
unit.
1
2
3
disappears on
Tip
Alarm timer is not available in MP3 LINK
mode.
If the DISC/USB/iPod/iPhone source is
selected but no disc inserted or no USB/iPod/
iPhone is connected, the system will switch to
the tuner source automatically.
When the unit is turned on, press SLEEP/
TIMER repeatedly to select a set period
of time (in minutes).
»
When sleep timer is activated, the
display shows .
Press SLEEP/TIMER repeatedly until
[OFF] is displayed.
»
When sleep timer is deactivated,
disappears on the display.
Press MP3 LINK to select MP3 LINK
source.
Connect the supplied MP3 link cable to:
MP3 LINK jack (3.5 mm) on the unit
the headphone jack on an external
device
Start to play the device (see the device
user manual).
EN 19