Select Stereo/Mono Broadcast; Other Features; Set The Alarm Timer - Philips DCM2060 User Manual

Select stereo/mono broadcast

Note
‡
Stereo broadcast is the default setting for tuner mode.
‡
For stations with weak signals: to improve the reception,
change to monaural sound.
In FM tuner mode, press OK to switch between
mono and stereo broadcast.
16 EN
All manuals and user guides at all-guides.com

6 Other features

Set the alarm timer

This unit can be used as an alarm timer. You can
select CD, FM tuner, iPod/iPhone/iPad, or USB
as alarm source.
Note
‡
Make sure that you have set the clock correctly.
1
In standby mode, press and hold TIMER
until [SET TIMER] VHW WLPHU VFUROOV RQ WKH
display.
» [SELECT SOURCE] VHOHFW VRXUFH LV
displayed.
2
Press SOURCE repeatedly or the source
selection buttons on the remote control to
select a source: disc, FM tuner, iPod/iPhone/
iPad, or USB.
3
Press TIMER WR FRQÀUP
» The hour digits blink.
4
Press / repeatedly to set the hour.
5
Press TIMER WR FRQÀUP
» The minute digits blink.
6
Repeat steps 4-5 to set the minute.
Note
‡
If no button is pressed in 90 seconds, the unit exits
alarm setting mode automatically.
‡
If iPod/iPhone/iPad is selected as alarm source, and you
have created a playlist called "PHILIPS" in iTunes and
import it to your iPod/iPhone/iPad, you will wake to a
random track in the playlist.
‡
If no "PHILIPS" playlist is created in the iPod/iPhone/
iPad or no track is stored in the playlist, you will wake
to your last listened track in the iPod/iPhone/iPad.