Other Features; Set Alarm Timer; Set Sleep Timer; Play Audio From An External Device - Philips AS141 User Manual

6 Other features

Set alarm timer

Set alarm
In standby mode, you can set two alarms to ring
at different time.
Note
‡
Make sure that you have set the clock correctly.
1
Press and hold AL1/AL2 for two seconds
to activate alarm setting mode.
» The hour and minute digits begin to
blink.
2
Press / and
the hour and minute.
3
Press AL1/AL2 WR FRQÀUP
Select alarm source
Note
‡
For alarm sound, you can select buzzer, your last
listened radio chanel, or the latest played track in your
Android phone.
Adjust AL1/AL2 RADIO·BUZZ·DOCK
control to select alarm source for both alarms.
Tip
‡
If DOCK is selected as alarm source, while no Android
phone is connected, the system switches to buzzer
source instead.
20 EN
All manuals and user guides at all-guides.com
/ repeatedly to set
Activate/deactivate alarm timer
1
Press AL1/AL2 to view alarm settings.
2
Press AL1/AL2 again to activate or
deactivate the alarm timer.
» The alarm icon appears if alarm timer
is on and disappears if it is off.
‡ To stop the ringing alarm, press the
corresponding AL1/AL2.
» The alarm repeats ringing for the next
day.
Snooze alarm
When alarm sounds, press SNOOZE.
» The alarm snoozes and repeats ringing nine
minutes later.

Set sleep timer

This docking system can switch to standby
mode automatically after a preset period.
Press SLEEP repeatedly to select the sleep
WLPHU SHULRG LQ PLQXWHV 
» When the sleep timer is activated,
appears.
To deactivate the sleep timer, press SLEEP
repeatedly until [OFF] RII DSSHDUV
Play audio from an external
device
You can listen to audio from an external device
through this device.
1
Connect the MP3 link cable to:
‡ the MP3 LINK socket.
‡ the headphone socket of an external
device.
2
Press SOURCE repeatedly to select MP3
link source.
»
is displayed.