Cleaning - Porkka ProMed MC 70 Installation And Operation Manual

Cleaning

Clean spillages immediately.
Ensure effective operation of the equipment and the quality of the products being stored
by defrosting and cleaning the equipment regularly, quarterly at a minimum.
MC70, 180 and 150/150 models:
Empty the condense water container regularly – the container is located inside the cabinet
at the bottom.
Remove all product and store them in a backup store when cleaning the cabinet.
NOTE!
Disconnect the cabinet from the main electrical supply by removing the cable and plug
from the wall socket.
Remove shelves and GN rails as well as drawers and runners (and shelf support uprights
with knurled-head-screws).
Wash the stainless steel, glass and plastic surfaces of the cabinet with a mild detergent
diluted with, water, e.g. dishwasher detergent or other suitable food safe cleaning product.
Use a cloth or paper towel to prevent scratching the steel surface.
Wipe with a damp cloth and allow the cabinet to dry.
NOTE!
Do not use detergents or disinfectants containing chlorine i.e. bleach, solvents, scouring
products, knives or other sharp tools when cleaning.
NOTE!
Do not use running water or a pressure washer to clean the cabinet
NOTE!
Refer to the product description to see which materials are suitable. Dry the equipment
after the disinfection and let it ventilate.
21
Condensation water container
at the bottom of the cabinet
ENGLISH