Table of Contents
Advertisement
liquids such as petrol or acetone to
clean the appliance.
Cleaning the appliance and
the brush head
Clean the appliance and the brush
head thoroughly with water after
each use, to ensure optimum
performance. Make sure the
appliance is switched off before
you start cleaning it.
1
Rinse the handle and the brush
head under the tap with warm
water (max. 40ºC/104ºF (Fig. 9)).
2 Remove the brush head from
the appliance (Fig. 10).
3 Clean the back of the brush
head and the connection pin of
the appliance under the tap at
least once a week (Fig. 11).
4 Open the socket cover, clean it
with a dry cloth and close it.
5 Dry these parts with a towel.
Cleaning the adapter
Danger: Always keep the
adapter dry. Never rinse it under
the tap or immerse it in water.
1
Make sure the adapter is
unplugged when you clean it.
Only wipe it with a dry cloth.
Charging the appliance
Charging the appliance takes
approximately 8 hours. A fully
charged appliance has a cordless
operating time of up to 20 minutes.
Note: The appliance cannot be
used directly from the mains (Fig. 4).
1
Make sure the appliance is
switched off.
2 Open the socket cover and
insert the small plug into the
socket. Put the adapter in the
wall socket (Fig. 12).
3 Charge the appliance. The
charging light lights up white
continuously to indicate that the
appliance is charging (Fig. 13).
Battery-low indication
- When the battery is almost
empty, the charging light lights
up orange for 15 seconds. The
battery still contains enough
energy for a complete treatment
(Fig. 14).
Storage
- To store the appliance
horizontally, place it on the anti-
roll ridge (Fig. 15).
- If you take the appliance with
you when you travel, put the
protection cap on the dry brush
head to protect the brush head
filaments (Fig. 16).
Note: Never put the protection cap
on the brush head if the brush head
is still wet.
Brush head replacement
Damaged brush heads or worn
filaments could lead to skin
irritation. Therefore brush heads
need to be replaced every 3
months or earlier if the filaments
are deformed or damaged.
Replacement brush heads are
available from our website
www.shop.philips.com/service or
from the shop where you
purchased your Philips VisaPure
Essential. If you have any difficulties
obtaining replacement brush
heads, please contact the Philips
Consumer Care Centre in your
country. You find its contact details
in the worldwide guarantee leaflet.
You can also visit
www.philips.com/support.
Other heads
If you like to know more about
other types of heads that are
available for specific skincare
needs, please visit
www.philips.com/beauty for
information.
Recycling
- This symbol means that this
product shall not be disposed of
with normal household waste
(2012/19/EU) (Fig. 21).
- This symbol means that this
product contains a built-in
rechargeable battery which shall
not be disposed of with normal
household waste (Fig. 22)
(2006/66/EC). Please take your
product to an official collection
point or a Philips service center
to have a professional remove
the rechargeable battery.
Advertisement
Table of Contents
