Table of Contents
Advertisement
- VisaPure cleanses your skin
deeply and stimulates blood
circulation. If your skin is used to
the treatment, you may
experience slight skin reactions
like redness or skin tightness on
occasion. If your skin is not used
to the treatment, these reactions
may be stronger and can last
longer, but should disappear
after some hours. To reduce
these skin reactions, you can
shorten the treatment time,
reduce the treatment frequency
and/or apply less pressure on
the skin during treatment.
After 2 weeks of daily usage,
your skin should have adapted
to treatment with VisaPure.
However, if you still experience
strong skin reactions after 2
weeks of daily usage, we advise
you to stop using VisaPure and
give your skin some time to
recover. You can continue your
treatment once the skin
reactions have disappeared,
using reduced treatment time
and frequency. If the strong skin
reactions reoccur, we advise you
to contact your doctor.
General
- Please note that the condition
of the skin varies throughout the
year. Facial skin can get dryer
during the winter season. In that
case you can reduce the
treatment time or frequency,
depending on the needs of your
skin.
- The appliance cannot be used
directly from the mains.
- Regular cleaning of the
appliance ensures optimal
results and a longer lifetime for
the appliance.
- The appliance complies with the
internationally approved IEC
safety regulations and can be
safely used in the bath or
shower and cleaned under the
tap.
- The appliance is equipped with
an automatic voltage selector
and is suitable for mains
voltages ranging from 100 to 240
volts.
Electromagnetic fields (EMF)
This Philips device complies with all
applicable standards and
regulations regarding exposure to
electromagnetic fields.
Using the appliance
You can either use the appliance in
front of the sink, in the shower or in
the bath. We advise you use
VisaPure Essential with your
favourite cleanser. You can cleanse
your face with VisaPure Essential
twice a day.
Daily facial cleansing with
VisaPure Essential
Cleansing procedure
Note: The appliance does not work
directly from the mains (Fig. 4).
Note: Do not use the brush head on
the sensitive skin around the eyes.
1
Push the brush head onto the
connection pin until it locks into
position with a click (Fig. 5).
2 Moisten the brush head with
water or liquid cleanser or apply
the cleanser directly on your skin
before you use the appliance.
Do not use the appliance with a
dry brush head, as this can
irritate the skin (Fig. 6).
3 Place the brush head on your
skin.
4 Press the on/off button once to
switch on the appliance. Press
twice to switch off the appliance
(Fig. 7).
Note: We advise you to not
cleanse your skin for longer than
1 minute, to prevent
overtreatment.
5 Gently move the brush head
across your skin from the nose
towards the ear (Fig. 8).
Do not push the brush head too
hard onto the skin to make sure
the treatment remains
comfortable.
6 After the treatment, rinse and
dry your face.
Your face is now ready for the
next step of your daily skincare
routine.
7 Clean the brush head with
water.
Cleaning and
maintenance
Never use scouring pads, abrasive
cleaning agents or aggressive
Advertisement
Table of Contents
