Charging The Appliance; Battery-Low Indication; Brush Head Replacement - Philips BSC111 User Manual

liquids such as petrol or acetone to
clean the appliance.
Cleaning the appliance and
the brush head
Clean the appliance and the brush
head thoroughly with water after
each use, to ensure optimum
performance. Make sure the
appliance is switched off before
you start cleaning it.
1 Rinse the handle and the brush
head under the tap with warm
water (max. 40°C/104°F) (Fig. 8).
2 Remove the brush head from
the appliance (Fig. 7).
3 Clean the back of the brush
head and the connection pin of
the appliance under the tap at
least once a week (Fig. 9).
4 Open the socket cover, clean it
with a dry cloth and close it.
5 Dry these parts with a towel.
Cleaning the supply unit
Danger: Always keep the supply
unit dry. Never rinse it under the
tap or immerse it in water.
Make sure the supply unit is
unplugged when you clean it. Only
wipe it with a dry cloth.

Charging the appliance

Charging the appliance takes
approximately 8 hours. A fully
charged appliance can be used for
at least 10 days without charging,
when using the VisaPure Essential
Mini twice on a daily basis.
Note: The appliance cannot be
used directly from the wall socket.
1 Make sure the appliance is
switched off.
2 Insert the small plug into the
socket of the appliance.
3 Put the supply unit in the wall
socket (Fig. 10).
4 Charge the appliance. The
charging light on the supply unit
lights up white continuously to
indicate that the appliance is
charging (Fig. 15).

Battery-low indication

- When the battery is almost
empty, the charging light lights
up orange for 15 seconds. The
battery still contains enough
energy for a complete treatment
(Fig. 11).
Storage
- To store the appliance
horizontally, place it on the anti-
roll ridge (Fig. 12), or place the
appliance upright with the
socket cover closed (Fig. 13).
- If you take the appliance with
you when you travel, put the
protection cap on the dry brush
head to protect the brush head
filaments (Fig. 14).
Note: Never put the protection cap
on the brush head if the brush head
is still wet, for hygienic reasons.

Brush head replacement

Damaged brush heads or worn
filaments could lead to skin
irritation. Therefore brush heads
need to be replaced every 3
months or earlier if the filaments
are deformed or damaged.
Replacement brush heads are
available from our website
www.shop.philips.com/service or
from the shop where you
purchased your Philips VisaPure
Essential Mini. If you have any
difficulties obtaining replacement
brush heads, please contact the
Philips Consumer Care Center in
your country. You find its contact
details in the International Warranty
leaflet. You can also visit
www.philips.com/support.
Other heads
All Visapure brush heads are
compatible with VisaPure Essential
Mini. The Revitalising Massage
head, Fresh Eyes head and Fresh
Skin head are only compatible with
Visapure Advanced, not with
Visapure Essential Mini
If you like to know more about
other types of heads that are
available for specific skincare
needs, please visit
www.philips.com/beauty for
information.
Recycling
- This symbol means that this
product shall not be disposed of
with normal household waste
(2012/19/EU) (Fig. 23).