Scope Of Delivery; Transport And Storage - Wilo Rexa MINI3 Installation And Operating Instructions Manual

Transport and storage

Example: Wilo-Rexa MINI3-V04.11/M06-523/A-5M
P = with plug
A = with float switch and plug
Cable length
5M
4.5

Scope of delivery

Equipment
Rexa MINI3-V.../M.../A...
Rexa MINI3-V.../M.../P...
Rexa MINI3-V.../T.../O...
Key:
− = Not included in scope of delivery, • = Included in scope of delivery
5 Transport and storage
CAUTION
Soaked packaging may tear!
The product may fall on the ground if unprotected and may be damaged. Lift wet
packaging carefully and replace it immediately!
▪ Wear protective gloves!
Minimum requirements in accordance with EN 388:2016, category II: 3131X
▪ Hold and carry the pump by the handle. Never pull it by the connection cable!
▪ Pack the pump when it is clean and dry and, if necessary, has been disinfected.
– Dirt fosters the formation of germs.
– Encrustations may lead to the impeller becoming blocked.
▪ Close the pressure connection.
▪ Protect the connection cable against kinking and damage.
▪ Pack the pump when dry. Wet or humid pumps may soften the packaging.
▪ Use the original packaging.
▪ Storage: -15 to +60 °C (5 to 140 °F), max. humidity 90 %, non-condensing.
Installation and operating instructions Wilo-Rexa MINI3
• •
− •
− −
en
•
•
•
41