Description Of Symbols; Specification - GMC GMCSDS18 Manual

Introduction
Thank you for purchasing this GMC tool. This manual contains information necessary for safe and effective
operation of this product. This product has unique features and, even if you are familiar with similar products,
it is necessary to read this manual carefully to ensure you fully understand the instructions. Ensure all users of
the tool read and fully understand this manual.

Description of Symbols

The rating plate on your tool may show symbols. These represent important information about the product or
instructions on its use.
Wear hearing protection
Wear eye protection
GB
Wear breathing protection
Wear head protection
Wear hand protection
Wear protective clothing
Read instruction manual
Caution!
Toxic fumes or gases!
Indoors use only! (battery charger)
T-130˚
Charger: Class II construction (double insulated for additional protection)
Keep bystanders away!
DO NOT incinerate batteries!
Conforms to relevant legislation and safety standards.
Environmental Protection
Waste electrical products and batteries, including Li-Ion batteries, should not be disposed of with
household waste. Please recycle where facilities exist. Check with your local authority or retailer
for recycling advice.
Original Instructions
Technical Abbreviations Key
V
~, AC
A, mA
n
o
Ø
°
λ

Specification

Voltage:
No load speed:
Chuck:
Impact rate:
Impact energy:
Safety clutch (operates at or below):
Max drilling capacity:
- Masonry
- Wood
- Steel
Dimensions (L x W x H):
Weight:
*Requires additional purchase of conventional chuck adaptor
Battery:
Model:
Cell type:
Voltage:
Capacity:
Battery Charger:
Input power:
Output power:
Charging time:
Cable length:
Ingress protection:
Protection class:
*Charging time approximate
As part of our ongoing product development, specifications of GMC products may alter without notice.
4
Volts Hz
⎓, DC
Alternating current
Ampere, milli-Amp W, kW
/min or min
No load speed -1
Diameter Ah
dB (A)
Degrees
Wavelength m/s 2
18V DC
0-300/0-1000min
SDS Plus
0-5000bpm
1.2J
25Nm
Ø 20mm
Ø 20mm*
Ø 10mm*
340 x 190 x 80mm
3kg (including battery)
GMC18V30
Li-ion
18V, DC
3.0Ah
230-240V~ 50/60Hz, 80W
14.4-18V DC, 3A
1hr*
2m
IPX0
Hertz
Direct current
Watt, kilowatt
(revolutions or reciprocation)
per minute
Amp hours
Decibel – A weighted
Vibration magnitude
-1