Description Of Symbols - GMC GCHD12 Manual

Description of Symbols

The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
DO NOT incinerate batteries!
Charger: Class II construction (double insulated for additional
protection)
Caution!
Conforms to relevant legislation and safety standards.
For indoors use only!
Li-ion battery cells are recyclable and should not be disposed of
with household waste. Please recycle where facilities exist. Check
with your local authority or retailer for recycling advice
Li-ion
Internal time lag fuse with a maximum current of 3.15A.
T3.15A
Environmental Protection
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your local authority or retailer for recycling advice.
Volts
V
Alternating current
~
Ampere
A
No load speed
n
o
Hertz
Hz
Watt, kilowatt
W, kW
(revolutions or reciprocation) per minute
/min or min -1
GB GB
CE Declaration of Conformity
The undersigned: Mr Darrell Morris
as authorised by: GMC
Declares that
Identiication code: GCHD12
Description: 12V Combi Hammer Drill
Conforms to the following directives and standards:
• EMC Directive 2004/108/EC
• Low Voltage Directive 2006/95/EC
• RoHS Directive 2011/65/EU
• Machinery Directive 2006/42/EC
• EN60745-1:2009+A11
• EN60745-2-1:2010
• EN60745-2-2:2010
• EN60335-1:2012
• EN60335-2-29:2004+A2
• EN62233:2008
• EN61000-3-2:2006+A1+A2
• EN61000-3-3:2008
• EN55014-1:2006+A1+A2
• EN55014-2:1997+A1+A2
Notiied body: TÜV Rheinland LGA Products.
The technical documentation is kept by: GMC
Date: 19/06/14
Signed:
Mr Darrell Morris
Managing Director
Name and address of the manufacturer:
Powerbox International Limited, Company No. 06897059. Registered
address: Central House, Church Street, Yeovil, Somerset BA20 1HH,
United Kingdom.
5
GB