Clock/Timer
Clock setting
There are two possible methods for setting the
clock: manually or automatically by using RDS.
Automatic clock setting
Refer to "Setting the RDS clock".
Manual clock setting
The clock can be set in either 12-hour or
24-hour mode ("AM 12:00" or "00:00" for
example).
1
In standby mode, press and hold CLOCK/RDS
on the remote control.
➜
SET CLOCK is displayed briefly. Then, the
clock digits for the hours flash.
2
Press Ç on the remote control to select clock
mode.
➜
"12 TO 24 HOUR" or "24 TO 12 HOUR"
scrolls once. Then, the clock digits for the hours
continue to flash.
3
Adjust VOLUME -/+ (or press VOL +/- on the
remote control) to set the hours.
4
Press CLOCK/RDS again.
➜
The clock digits for the minutes flash.
5
Adjust VOLUME -/+ (or press VOL +/- on the
remote control) to set the minutes.
6
Press CLOCK/RDS to confirm the time.
Timer setting
●
The system can be used as an alarm clock,
whereby the CD, FM or USB is switched on at a
set time (one time operation). The clock time
18
needs to be set first before the timer can be
used.
●
During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
1
In standby mode, press TIMER/SLEEP on the
remote control for more than two seconds.
2
Press SOURCE repeatedly to select the sound
source.
➜
"SET TIME" and "SELECT SOURCE" are
displayed.
3
Press TIMER/SLEEP to confirm your desired
mode.
➜
"SET ON TIME" is displayed and the clock
digits for the hours flash.
4
Adjust VOLUME -/+ (or press VOL +/- on the
remote control) to set the hours.
5
Press TIMER/SLEEP again.
➜
The clock digits for the minutes flash.
6
Adjust VOLUME -/+ (or press VOL +/- on the
remote control) to set the minutes.
7
Press TIMER/SLEEP to confirm the time.
➜
The timer is now set and activated.
Activating and deactivating timer
●
In standby or during playback, press TIMER/
SLEEP once on the remote control.
➜
Display shows
deactivated.
Sleep timer setting
The sleep timer enables the system to switch off
by itself after a set period of time.
1
Press TIMER/SLEEP on the remote control
repeatedly to select a preset time.
➜
The selections are as follows (time in
minutes):
60
60
60 ™ 45
45
45
45 ™ 30
30
30 ™ 15
30
60
60
45
30
➜
"SLEEP XX" is displayed. "XX" is the time in
minutes.
➜
is displayed if the sleep time you have
selected is not 0.
2
When you reach the desired length of time, stop
pressing the TIMER/SLEEP button.
To deactivate the sleep timer
●
Press TIMER/SLEEP repeatedly until "0" is
displayed, or press Eco Power/STANDBY-IN
2.
if activated, and disappears if
15
15 ™ 0 0 0 0 0 ™ 60
15
60
60
15
60 ...
60